Epson FX-1180 - Impact Printer Короткий посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Короткий посібник для Аксесуари для принтерів Epson FX-1180 - Impact Printer. Epson FX-1180 - Impact Printer 33 сторінки. Epson serial impact dot matrix printers
Також для Epson FX-1180 - Impact Printer: Посібник з налаштування (33 сторінок), Брошура та технічні характеристики (24 сторінок), Інформація про продукт (17 сторінок), Короткий довідник (16 сторінок), Посібник (11 сторінок), Специфікація (2 сторінок), Посібник (18 сторінок), Технічні характеристики (2 сторінок), Обмежена гарантія (1 сторінок), Довідковий посібник (34 сторінок)

Друкувати сторінку
Epson FX-1180 - Impact Printer Короткий посібник
Packet mode
Make sure to select AUTO when you print
from Windows applications using the
printer driver included in the Printer
Software CD-ROM that comes with the
printer. Turn this feature off if you have
connection troubles while printing from
applications based on other operating
systems such as DOS.
0 slash
The zero character has a slash
feature is on; it has no slash (0) when this
feature is off. The slash allows you to easily
distinguish between the uppercase letter
"O" and a zero.
Buzzer (beeper)
The printer beeps when an error occurs. See
"Error Indicators" for more information on
printer errors. If you do not want the printer
to beep when an error occurs, turn off this
setting.
Auto CR (carriage return)
This setting is available only in IBM PPDS
emulation mode. When auto carriage return
is on, each line feed (LF) code or ESC J code
is accompanied by a carriage return (CR)
code so the printer moves the next printing
position to the left margin. When this setting
is off, you must send a CR code after the line
feed code to move the printing position to
the left margin.
IBM character table
This setting is available only in IBM PPDS
emulation mode. When you select Table 1,
hex codes 00H to 1FH and 80H to 9FH of the
character tables are used for the control
codes. When you select Table 2, hex codes
00H to 1FH are used for the control codes
and 80H to 9FH are used for characters.
Downloaded from:
http://www.usersmanualguide.com/
EPSON FX-880+/FX-1180+ Quick Guide
Page length for front tractor
Page length for rear tractor
Character table
( ) 0 /
when this
International character set for italic table
This setting allows you to set the page length
(in inches) for the continuous paper loaded
on the front push tractor.
This setting allows you to set the page length
(in inches) for the continuous paper loaded
on the rear push tractor.
You can select among various character
tables.
You can select among several international
character sets for the italic character table.
Each character set contains eight characters
that vary depending on the country or
language, so you can customize the italic
table to suit your printing needs.
Default Settings (3/4)