TomTom Eclipse AVN2210p Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для GPS TomTom Eclipse AVN2210p. TomTom Eclipse AVN2210p 44 сторінки. In-dash portable navigation with cd/usb multi-source receiver
Друкувати сторінку
Memorizing Stations
Memorizing Stations Manually
1
Tune into the station to be memorized for the preset channel.
2
Press the [MODE] button to select the rotary select mode.
3
Turn the [VOL] rotary knob to select one of the preset channels P1 to P6.
4
Press the [ENTER] button until "P MEMORY" appears on the sub display.
The selected station is memorized and the preset registration number and frequency
are indicated on the display.
To manually set additional selected stations for the remaining preset channels, repeat
this procedure for each channel.
If the stations have been stored in memory, selecting the preset channel with the
[MODE] button and the [VOL] rotary knob or pressing a switch between [1] and [6] on
the PND display will allow you to tune to that preset station.
CAUTION
If the vehicle's battery is disconnected (for repairs to the vehicle or for removing the main unit), all
stations in memory will be lost. In such a case, set stations in memory again.
Memorizing Stations Manually on the PND Display
1
Tune into the station to be memorized.
2
Press the [SCREEN] button and switch the display to the audio screen.
Touch and hold the preset switch where you want to memorize the station until
3
"P MEMORY" appears on the sub display.
The selected station will be memorized.
To manually set additional selected stations at the remaining preset channels, repeat
this procedure for each channel.
Subsequently, when you listen to the radio you will be able to select stations by
touching the preset switches.