DIHL VC-HH600-BLUE Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Пилосос DIHL VC-HH600-BLUE. DIHL VC-HH600-BLUE 8 сторінок.

USING THE APPLIANCE

Using the Crevice Tool

Fit the telescopic extension into the air inlet.

Push the crevice/brush tool onto the end of the telescopic extension, or onto the end of the accessory

attachment nozzle if the telescopic extension is not in use.

Select which attachment is to be used by rotating the head to either the crevice or the brush settings.

Turn on the cyclonic vacuum cleaner by pressing the on / off switch.

Using the Floor Brush

Attach the telescopic extension to the air inlet.

Push the floor brush attachment onto the end of the

telescopic extension.

Adjust the telescopic extension tube to the required

length by pressing the telescopic extension tube button

and sliding out the tube.

Select which position on the floor brush is required for the

floor type by pressing the switch forwards or backwards.

Switching it forwards lifts the brushes for use on carpet,

and switching it backwards lowers the brushes for

Plug the appliance into a socket and press the ON/OFF button. Be careful not to trap the cable under

furniture or doors etc.

Emptying the Dust Tank

Press the on / off button to turn off the appliance.

Unplug the power cord.

Use one hand to hold the air inlet, and use another hand to hold the

handle of the vacuum cleaner while pressing the dust tank release switch.

Pull the hand that is holding the air inlet up to separate the dust tank from

the vacuum cleaner.

Pull the dust tank upwards to remove it; do not pull it directly away from

the vacuum cleaner.