Epson LQ-570e Інформаційний посібник про продукт - Сторінка 15

Переглянути онлайн або завантажити pdf Інформаційний посібник про продукт для Аксесуари для принтерів Epson LQ-570e. Epson LQ-570e 18 сторінок. Epson serial impact dot matrix printers
Також для Epson LQ-570e: Інформаційний посібник про продукт (8 сторінок), Посібник (12 сторінок), Короткий довідник (15 сторінок), Технічні характеристики (2 сторінок), Посібник з монтажу (8 сторінок), Бюлетень підтримки продукту (16 сторінок), Довідковий посібник (34 сторінок)

6. Replace the paper guide, if necessary, and replace the printer

cover. Then close the paper guide cover.

7. Turn on the printer. Make sure the Paper Out and Pause

lights are off.

While you can often set the default settings through your

application software or printer driver, you may need to change a

default setting from the printer's control panel using the default

setting mode. The table below lists the default settings (in bold)

and options you can select in this mode.

Follow the steps below to enter the default setting mode and

change the printer's default settings.

1. Make sure paper is loaded and the printer is turned off.

2. While holding down the

The printer enters the default-setting mode and prints the

language selection instructions.

3. If you need to select a different language, press the

button until the Font lights indicate the language you want,

as described in the language selection instructions.

4. Press the

selection and print the current default settings.

5. If you do not need to change any settings, go to step 6.

If you want to change any of the default settings, press the

button to print the instructions (three pages)

in the language you selected.

Follow these instructions to change the default settings

using the buttons on the printer's control panel.

6. When you finish, turn off the printer and exit the default

setting mode. The current settings remain in effect until

you change them again.

If you notice that the vertical lines in your printout are not

properly aligned, you can use the printer's bidirectional

adjustment mode to correct this problem.

1. Make sure paper is loaded and the printer is turned off.

4/00

EPSON LQ-570e

button, turn on the printer.

button to confirm your language

EPSON LQ-570e

- 15