LQ-300+ default-setting mode
This printer has no DIP switches; however, the following settings can be made in a special
default-setting mode.
Setting
Page length for tractor
Skip-over-perforation
Auto tear off
Auto line feed
Print direction
Software
0 slash
High speed draft
I/F mode
Auto I/F wait time
Baud rate
Parity
Data length
Parallel I/F bidirectional mode
Packet mode
Character table(STD version)
Character table(NLSP version)
International character set
Pitch
Font *1
Auto CR(IBM2390Plus)
A.G.M. (IBM2390Plus)
Manual feed wait time
Buzzer
Roll paper
Note: Bold letters indicate the standard factory settings.
.
*1 The selected Font (OCR-B, Orator, Orator-S, Script C, Roman T, Sans Serif H) is set to 'Others'
on the control panel.
Draft, Draft Condensed, Roman, Sans Serif, Courier, Prestige and Script can be selected through
the control panel only.
3inch, 3.5inch, 4inch, 5.5inch, 6inch, 7inch, 8inch, 8.5inch, 11inch, 70/6inch, 12inch, 14inch, 17inch
19200BPS,9600BPS,4800BPS,2400BPS,1200BPS,600BPS,300BPS
Italic, PC437, PC850, PC860, PC863, PC865, PC861, BRASCII, Abicomp, Roman8, ISO Latin 1, PC858,
Italic, PC437, PC850, PC437 Greek, PC853, PC855, PC852, PC857, PC864, PC866, PC869, MAZOWIA,
Code MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC 774, Estonia, ISO 8859-2, PC 866 LAT., PC 866UKR,
PC APTEC, PC708, PC720, PCAR 864, PC860, PC865, PC861, PC863, BRASCII, Abicomp, Roman8,
ISO Latin 1, PC858, ISO8859-15, PC 771
Italic U.S.A., Italic France, Italic Germany, Italic, U.K., Italic Denmark 1, Italic Sweden, Italic Italy, Italic
10CPI, 12CPI, 15CPI, 17CPI, 20CPI, Proportional
OCR-B, Orator, Orator-S, Script C, Roman T, Sans serif H
1 seconds, 1.5 seconds, 2 seconds, 3 seconds
14
Options
OFF, ON
OFF, ON
OFF, ON
Bi-d., Uni-d., Auto
ESC/P2, IBM 2390 Plus
OFF, ON
OFF, ON
Auto, Parallel, Serial
10 seconds, 30 seconds
None,Odd,Even,Ignore
8bit,7bit
OFF, ON
Auto, OFF
ISO 8859-15
Spain 1
OFF, ON
OFF, ON
OFF, ON
OFF,ON
Друкувати сторінку