Epson LQ-630 Посібник з налаштування
Переглянути онлайн або завантажити pdf Посібник з налаштування для Аксесуари для принтерів Epson LQ-630. Epson LQ-630 2 сторінки. 24-pin dot matrix printer
Також для Epson LQ-630: Технічні характеристики (2 сторінок), Посібник з налаштування (2 сторінок), Почніть звідси. (2 сторінок)
Друкувати сторінку
24-pin Dot Matrix Printer
Unpacking the Printer
Unpacking the Printer
Unpacking the Printer
Unpacking the Printer
printer
Software CD-ROM
Assembling the Printer
Assembling the Printer
Assembling the Printer
Assembling the Printer
1. Make sure the printer is turned off and unplugged.
2. Open the printer cover.
Then, move the print head slightly to the right.
3. Pull the paper bail forward, then flip it towards you, as shown.
4. Remove the ribbon cartridge from the package.
5. Separate the ribbon guide from the cartridge by
pulling the ribbon guide forward.
Caution:
c
Do not tear off the clear film on the ribbon
guide. Doing so may cause paper jams or
printer malfunctions.
Connecting the Printer to Your Computer
Connecting the Printer to Your Computer
Connecting the Printer to Your Computer
Connecting the Printer to Your Computer
Connecting the printer
Make sure both the printer and computer are turned off, then connect the interface
into the printer and computer.
paper guide
ribbon cartridge
power cord
It may come attached to the
printer in some countries.
Setup Guide
Notice sheet
w
4041761-00
Warnings
must be followed
xxx
carefully to avoid bodily injury.
Remove the protective materials
Follow the directions on the Notice Sheet to remove the protective materials.
Save all packing and protective materials in case you need to ship the printer in the
future.
6. Insert the ribbon cartridge into the
printer, then press both sides of the
cartridge firmly to fit the plastic hooks
into the printer slots.
7. Hold the ribbon guide and slide the
protruding parts on both sides into
the slots of the print head until it clicks
in place.
8. Turn the ribbon-tightening knob to
help feed the ribbon into place; it
should not be twisted or creased.
9. Close the paper bail and printer cover.
10.Attach the paper guide.
Plugging in the Printer
Make sure the printer is turned off, then plug the power cord into a properly grounded
electrical outlet.
Warnings, Cautions, and Notes
c
Cautions
must be observed
Notes
contain important
to avoid damage to your
information and useful tips on
equipment.
the operation of your printer.