Epson RX500 - Stylus Photo Color Inkjet Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для принтерів Epson RX500 - Stylus Photo Color Inkjet. Epson RX500 - Stylus Photo Color Inkjet 15 сторінок. Product support bulletin(s)
Також для Epson RX500 - Stylus Photo Color Inkjet: Посібник користувача (20 сторінок), Інформаційний листок продукту (4 сторінок), Технічні характеристики (2 сторінок), Посібник "Почніть тут (9 сторінок), Посібник з налаштування (2 сторінок), Посібник користувача (12 сторінок), Оновлення (1 сторінок), Бюлетень підтримки продукту (6 сторінок), Бюлетень підтримки продукту (1 сторінок), Інструкція з експлуатації (4 сторінок)

Epson RX500 - Stylus Photo Color Inkjet Посібник користувача
EPSON Stylus Photo RX500
3. If necessary, press the Copy button to display the copy
mode settings on the LCD screen. Change any necessary
copy settings, as described in "Changing Copy Settings"
below.
4. Press the x Color button (for both color and grayscale
photos, and for all color documents) or x B&W button
(for black and white copies). Your document is scanned and
then printed.
If you're using the 2-up or 4-up copy layout settings
described below, repeat these steps for your other photo(s)
or document(s).
Tip:
Your grayscale photos look better when you print them using
the x Color button
Note:
Your copied image size may not be the exact same size as your
original.

Changing Copy Settings

The current copy settings are shown on the LCD screen. You
can change copy settings using the buttons, as described
below.
LCD screen and menu navigation buttons
Copy button
Note:
To clear a setting, press the Clear/Reset button. To clear all the
setting changes you've made, press and hold the Clear/Reset button
until you see Resetting on the LCD screen.
Number of Copies
Press one or two buttons on the control panel's numeric
keypad to select the number of copies you want to print.
Glossy
Photo
Note:
You can print up to 99 copies. However, if you're using the 2-up or
4-up Copy Layout setting, you can only select one copy.
EPSON Stylus Photo RX500
6 -
Stop button
Select
Clear/Reset
Color button
buttons
button
100%
01
LTR
Number of copies
Copy Layout
Since the copy layout setting determines the options available
with many other settings, select this option first, then select
your other copy settings.
1. While in copy mode, press the Menu button.
Note:
The Copy button on the control panel is green when copy mode
is enabled.
2. Press OK to enter copy layout mode.
3. Press the bottom left button to select one of the options in
the table below. Then press the OK button.
Press this button
Choose from these options:
Copy Layout setting
Standard
Copies your original with a
0.12-inch margin on all edges
BorderFree
Sizes your original as needed
to fit to the edges of 4 × 6, 5 × 7,
8 × 10-inch, or letter-size paper*
Min Margins
Copies your original with only a
0.06-inch border around the
edges*
Repeat Auto
Copies an image as many times as
it will fit on one sheet
Works best with originals that are
business card-size or smaller
Repeat-4, Repeat-9, Repeat-16
Copies an image four, nine, or 16
times on one sheet
Works best with originals that are
business card-size or smaller
2-up
Copies two originals onto one
sheet
4-up
Copies four originals onto one
sheet
10/03
Copy Layout
1.Standard
Result