Argos THG2203 Посібник з монтажу та експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для гриль Argos THG2203. Argos THG2203 19 сторінок. Deluxe 2 burner gas barbecue with side burner

Друкувати сторінку

G4. Fixing the Regulator to the Gas Bottle

Confirm all barbecue control knobs are in the off

position. Connect the regulator to the gas bottle

according to your regulator and bottle dealer's

instructions.

G5. Leak Testing (To be performed in a well-

ventilated area.)

Confirm all control knobs are in the off position.

Open the gas control valve on the bottle or

regulator. Check for leaks by brushing a solution of

½ water and ½ soap over all gas system joints,

including all valve connections, hose connections and

regulator connections. NEVER USE AN OPEN

FLAME to test for leaks at anytime. If bubbles form

over any of the joints, there is a leak. Turn off the

gas supply and retighten all joints. Repeat test. If

bubbles form again, do not use the barbecue. Please

contact your local dealer for assistance. Leak test

annually, and whenever the gas bottle is removed or

replaced.

H. Operation

H1. Warning

•

Before proceeding, make certain that you

u n d e r s t a n d

t h e

INFORMATION section of this manual.

H2. Preparation Before Cooking

To prevent foods from sticking to the cooking grill,

please use a long handled brush to apply a light coat

of cooking or vegetable oil before each barbecuing

session. (Note: When cooking for the first

time, paint colours may change slightly as a

result.

This

normal

expected.)

H3. Lighting the Barbecue

•

Open the barbecue hood.

•

Ensure all knobs are in the off position. Open

the gas control valve on the gas bottle or

regulator.

•

Push and turn the leftmost control knob to the

high position. Press the ignition button rapidly

several times until left portion of the burner is

lit. If burner fails to ignite, turn control knob to

the off position and turn gas off at the bottle or

regulator. Wait five minutes, then repeat the

above steps. After successful lighting of the left

side, ignite the remaining burner from left to

right. If the burner fails to ignite after following

above procedure, turn all the knobs to the off

position. Close the gas valve on the gas bottle.

Wait 5 minutes, then repeat the above steps. If

the barbecue still fails to light, please refer to

the manual ignition instructions in section

Check the box and make sure you have all the parts and fittings listed. If not, contact your local store or the

Helpline

•

H4. Manual Ignition Instructions

•

I M P O R T A N T

H5. Lighting the Side Burner

Rise the lid of side burner. Push and turn the side

burner control knob anti-clockwise to the high

position. Push the ignition button rapidly until side

burner is lit. If the side burner fails to ignite, turn the

control knob to the OFF position and wait five

minutes before attempting to re-light following the

above procedure. If the side burner still fails to ignite,

and

should

please hold a long lit match near side burner head to

ignite.

H6. Grill Cooking

The stainless steel burners heat up the flame tamers

underneath the grill, which in turn heats the food on

the grill. The natural food juices produced during

cooking fall onto the hot flame tamers below and

vaporise. The subsequent rising smoke bastes the

food, as it travels upwards, imparting that unique

barbecued flavour. More even cooking of food will

be achieved by using the BBQ with the hood down.

This should only be done with the burners on low.

H7. Roasting Hood Cooking

Barbecues equipped with a roasting hood give the

option of cooking with hood closed to form an

'oven' for roasting food, such as joints of meat,

whole chickens, etc.

When the hood is closed, a large amount of heat is

trapped inside the barbecue. Thus, it is IMPORTANT

0844-335-0229

who will be able to help you.

below.

After ignition, the burner should be burned at

the high position for 3-5 minutes in order to

preheat the barbecue. This process should be

done before every cooking session. The hood

(where applicable) should be open during

preheating.

After completion of preheating, press and turn

the control knob to the low position for best

cooking results.

Insert lit match through the match-lighting hole

on the right side of the barbecue.

Push and turn the rightmost control knob anti-

clockwise to the high position.

After the right portion of the burner is lit, light

the remaining portion of the burner.

If burner fails to ignite, contact your local dealer

for assistance.

After ignition, the burner should be burned at

the high position for 3-5 minutes in order to

preheat the barbecue. This process should be

done before every cooking session. The hood

should be open during preheating.

After completion of preheating, turn the burner

to the low position for best cooking results