Argos THG3208 Посібник з монтажу та експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для гриль Argos THG3208. Argos THG3208 19 сторінок. 3 burner stainless steel with hood gas barbecue
Друкувати сторінку
15
Install the Warming Rack (A6) into barbecue hood/body as shown. Place the Grid (C2) onto the side burner.
16
IMPORTANT: Snip the line which hang hex spanner on the Hose / Regulator Assembly (B7) to get the spanner.
IMPORTANT:Carefully screw the brass hex hose fitting onto the brass threaded gas inlet assembly on the side
burner.
IMPORTANT: Screw hand tight only. Then using the hex spanner turn the hex nut a further 1/8 of a turn to
ensure tightened. (DO NOT OVERTIGHTEN – DO NOT USE ANY SEALING TAPE OR LIQUID ON THE
CONNECTION.)
IMPORTANT - LEAK TESTING BEFORE USE, FAILURE TO
CHECK AND PERFORM THE LEAK TEST COULD CAUSE
SERIOUS INJURY, AND DAMAGE THE BARBECUE.
12
Check the box and make sure you have all the parts and fittings listed. If not, contact your local store or the
0844-335-0229
Helpline
who will be able to help you.