Argos VCB43B12M Інструкція з експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пилосос Argos VCB43B12M. Argos VCB43B12M 14 сторінок. Bagged large cylinder vacuum cleaner

Друкувати сторінку

Argos VCB43B12M Інструкція з експлуатації

1. Parts

Maintenance

Cleaning the air filter or HEPA filter

The exhaust air filter or HEPA filter

cleans the air a final time before it

leaves the vacuum cleaner. This filter

and the grid that covers the filter

should be cleaned regularly. You can

clean the filter as follows:

1. Turn off and unplug the vacuum

cleaner. Always pull the plug itself,

never pull the cord.

2. Open the grid that covers the filter

by pushing it upwards at the clip. The

filter is visible when the grid is

removed.

3. Take out the filter.

4. Rinse the filter under cold water

and let it air dry completely.

5. Put the filter back into place or

replace the filter by a new one. Make

sure that the filter is placed properly.

6. Seal with the grid. Make sure that

the grid clicks into place.

CAUTION:

• Always use the vacuum cleaner

with the filters in place. If not, this can

lead to loss of power or damage to

the motor.

• Remove the plug from the socket

before cleaning the filters.

• Do not place the filters in the

dishwasher.

• Do not use a hair dryer to dry the

filters.