Epson Stylus C82WN Почніть звідси.

Переглянути онлайн або завантажити pdf Почніть звідси. для Аксесуари для принтерів Epson Stylus C82WN. Epson Stylus C82WN 2 сторінки. Epson stylus c82wn: quick start
Також для Epson Stylus C82WN: Технічні характеристики (2 сторінок), Інформаційний листок продукту (4 сторінок), Технічні характеристики (2 сторінок)

Друкувати сторінку

Start Here

EPSON Stylus

C82WN

Follow these instructions if you're an advanced user and your network has a

wireless access point or AirPort

Base Station. This includes wired networks

that have wireless access points. For more detailed instructions, see your

Setup and Installation book.

Unpack and

Set Up the Printer

Take everything out of the box.

Print server base

Setup and

Printer Basics

Installation

Print server

Printer software

Parallel cable

CD-ROM

Paper support

Print server

power supply

Ink

cartridges

Printer

Remove all the tape and packing material inside and around the printer.

The tape may be in different places on your printer, so check carefully.

Slide the paper

support into the

grooves as shown.

It should fit securely.

Plug in the printer and

press the

power

button until the green

light comes on.

Power

button

Lower the output tray and open the cover.

Shake the package of ink cartridges

4 or 5 times. Then remove the cartridges

from the package.

continue

Insert each cartridge into its holder

and push it into place.

Note: Don't remove the cartridge labels,

or ink may leak.

Press the

ink button and close the

printer cover. Wait while the ink charges.

Caution: Don't turn off the printer while the green light is flashing, unless

the printer hasn't moved or made any noise for more than 5 minutes.

Place paper against the right edge

of the sheet feeder, then slide the

edge guide against the paper.

Pull out the output tray extensions.

To check the printer, first turn it off. Then hold

down the

paper button as you press and

release the

power button to turn it back on.

The test page prints.

If the test page doesn't print, see the "Problem Solving" chapter

in Printer Basics.

Install the Software

Follow the appropriate instructions below to install the software if you

have a wireless access point or AirPort Base Station. If you don't, see your

Setup and Installation book.

Windows

Make sure the wireless mode for your computer is set to Infrastructure

and WEP encryption is disabled.

For instructions, see the documentation for your wireless adapter.

Insert your printer software CD-ROM.

Double-click Install EPSON

Stylus C82WN Printer Driver

and follow the instructions

on the screen.

When you see this window, click

Stop searching. Then follow the

instructions on the screen to finish

installing and register your printer.

Note: The Stop Searching button

may take a minute or two to appear.

Double-click Install EPSON Status Monitor on the EPSON

Installation Program screen and wait while the files are copied.

Double-click Install EPSON Printer Information Center and

follow the on-screen instructions to install the information center.

Double-click Install EpsonNet Wireless Print Server Utilities.

If you see this message click Continue.

Caution: You must install the

Java Runtime Environment if it's

not already installed on your computer.

When you see the license agreement, read it and

click Yes to continue. Follow the instructions on the screen.

continue

When you see this window

select Program Files and

WP-Admin and click Next.

You see the Wireless

Server Search Window.

Continue with the instructions in section 3, "Connect the Print Server."

Macintosh

Before you begin, do the following:

•

Make sure that AirPort is on and that both AppleTalk

and

TCP/ IP are enabled.

•

Select a working connection to an AirPort Base Station or to an

access point.

•

Make sure that WEP encryption is disabled on your wireless network.

For details, see your AirPort or Macintosh documentation.

Insert your printer software CD-ROM.

Mac

OS X: Double-click the EPSON CD-ROM icon to open it,

then double-click the Software for OS X folder. Double-click the

C82Series icon, and enter your administrator password, if necessary.

Mac OS 8.6 to 9.x: Double-click the Software for OS 8.6-9.x folder

in the EPSON window (you may have to double-click the EPSON

CD-ROM icon on your desktop to open the window). Double-click the

Printer Driver Installer folder, then double-click the

Stylus C82WN

Installer icon.

Click Continue.

Follow the instructions on the screen to install the printer driver and

restart your Macintosh.

If necessary, double-click the EPSON CD-ROM icon to open your

EPSON window.

Do one of the following:

Mac OS X: Double-click the Software for OS X folder if necessary,

then double-click the

Printer Information Center icon. Follow the

on-screen instructions to install the information center.

Mac OS 8.6 to 9.x: Double-click the Software for OS 8.6-9.x folder,

then double-click the Printer Information Center folder. Double-click

the

Printer Information Center icon and follow the on-screen

instructions to install the information center.

Do one of the following:

Mac OS X: Double-click the

Wireless Utility Installer icon.

Mac OS 8.6 to 9.x:

Double-click the Install

Wireless Utility folder, then

double-click the

Wireless

Utility Installer icon.

You see the print server

install window:

Click Next.

Read the license agreement. Click Next to accept the agreement

and continue.

Follow the instructions on the

screen to install WP-Admin.

At the last screen, click Done.

You see the Wireless Server

Search window.

Continue with the instructions in section 3, "Connect the Print Server" .

Connect the Print Server

Slide the print server into the base and press firmly.

Turn off the printer. Then connect the parallel cable to the printer

and print server.

Connect the power supply to the print server and plug in the AC

adapter. Both the green and yellow lights come on and then go out.

Turn on the printer.

To test the connection, press the test button for one second

and release it. The status page prints.

Test button

If the status page doesn't print, or it indicates that zero bytes were

transmitted or received, check the solutions under "Problems?"

on the back of this sheet.

Turn over