Argosy HD 360U Посібник - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник для Зберігання Argosy HD 360U. Argosy HD 360U 11 сторінок. Usb 2.0 3.5" external hard disk drive
Також для Argosy HD 360U: Технічні характеристики (1 сторінок)

Друкувати сторінку

Note:

If the hard disk in the external hard disk kit is a whole new hard disk without

any partition, when the Disk Management is opened, a 'Stop' mark indicates

this drive is an 'Unknown' type of disk (refer to the figure shown on right side).

In this situation, Windows system won't allow you to create partition with this drive. In the

meantime, you can:

♦ In Windows 2000: Windows will start up the 'Write Signature and Upgrade Disk Wizard'

immediately. You can use this 'Wizard' to initial the hard disk to the 'Basic Disk' type and

can then create partition in the drive.

♦ In Windows XP: you can right-click on the 'Stop' mark, and then click 'Initialize disk' to

initial the hard disk to the 'Basic Disk' type and can then create partition in the drive.

If the type of the hard disk drive is 'Dynamic', you must change it to the 'Basic'. To do this,

right-click on the status area (left area) of Disk 1, and then click 'Revert to Basic Disk' from the

options. Wait for few seconds, the type of the hard disk drive will be changed to 'Basic' type.

To create a new partition in the external hard disk, right-click on the right area of Disk 1, click on

'Create Partition...', the 'Create Partition Wizard' appears, click Next.

Select 'Primary partition', click Next.

Specify the size that you want this partition to be, click Next.

Assign a drive letter for this partition, please use the default value, and click Next.