Dillon FI-80 LCD Посібник користувача - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Dillon FI-80 LCD. Dillon FI-80 LCD 19 сторінок.

Друкувати сторінку

B.1.1.1 RECOGNIZED HOST COMMANDS

"P" - This command is sent to the indicator to print the indicated display. The

"Z" - This command is sent to the indicator to zero the scale. The indicator will not

"T" - This command is sent to the indicator to tare the scale. The indicator will not

"G" - This command is sent to the indicator to revert to gross mode. The indicator

"N" - This command is sent to the indicator to revert to net. The indicator will not

"C" - This command is sent to the indicator to toggle among the configured units.

B.1.2 PRINT TICKET MODE

The Print Ticket Mode is designed specifically for a serial printer and is selected by setting

A6 to "1". Figure B-3 shows the fixed format of the print ticket.

For printers with limited buffers, this mode supports DTR pin handshaking. The DTR pin

from the serial printer is wired to the indicator's RXD pin which then functions as a CTS pin.

Figure B-4 shows a suggested cable diagram for interfacing to a serial printer. Refer to the

printer's user manual to confirm which pin is the DTR pin.

NOTES:

1. The TARE and NET fields are not printed unless a tare has been established in the

system.

2. The ID number field is not printed if it is disabled in A7 of the User Menu.

ID. NO.

123456

GROSS

25.00 LB

TARE

1.48 LB

NET

23.52 LB

FIGURE B-3. Print Ticket

indicator will not respond if the scale is in motion, positive overload or

negative overload.

respond if the scale is in motion, positive overload or negative overload. The

indicator will also not respond if it is not in gross mode or within the zero

range specified in F4 of the Setup Menu.

respond if the scale is in motion, positive overload or negative overload. The

indicator will also not respond if it displaying a negative gross value.

will not respond if the scale is in motion, positive overload or negative

overload. The indicator will also not respond if it is not in net mode.

respond if the scale is in motion, positive overload or negative overload. The

indicator will also not respond if it is not in gross mode or a tare has yet to be

established.

Appendix B

INDICATOR

CTS 2

TXD 3

S. GND

DSUB9

FIGURE B-4.

Cable Diagram for Indicator to Printer

PRINTER

3 RXD

20 DTR

7 S. GND

DSUB25