Motorola defy SATELLITE LINK Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Мобільний телефон Motorola defy SATELLITE LINK. Motorola defy SATELLITE LINK 16 сторінок.
Power
Check In key
SOS key
Notification LEDs
Your device has three LEDs. These are used to tell you the state that the device is in.
Power
motorola defy satellite link
Power on
Power off
Enter bluetooth pairing
mode
Check in activation
Activate SOS
Cancel SOS
Device powered on and ready,
but not paired
Bluetooth pairing mode
activation
Bluetooth paired
Press and hold the power key until the device
vibrates. The LED will flash blue 3 times.
Press and hold for 3 seconds to power off the
device, the device will vibrate and beep to
confirm it has powered off.
Once powered on, press the power button again
to activate bluetooth pairing mode. The status
light will flash blue quickly in this mode. (Note:
This is only possible if not already paired to a
device).
Press the key for 1 second, until the device
vibrates. This triggers the predefined check
in message to be sent. In the app you can see
a map that shows all your sent and received
check in locations. (Note: Consecutive Check in
notifications cannot be sent within 90 seconds
of each other)
Hold SOS key for 5 seconds
Hold SOS key again for 5 seconds
Blue LED will flash 3 times slowly then turn off.
Blue LED will flash quickly. Pairing mode
remains active for 1 minute.
Blue LED will remain solid for 5 seconds then
turn off.
To check the device is paired press the power
key once. If the device is paired the blue LED
will be on for 5 seconds and then turn off.
5