Epson TM-H6000II Інструкція з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари для принтерів Epson TM-H6000II. Epson TM-H6000II 12 сторінок. How to connect printer with a wireless adapter
Також для Epson TM-H6000II: Брошура (2 сторінок), Брошура (2 сторінок), Посібник користувача (15 сторінок), Посібник (13 сторінок)
Друкувати сторінку
How to connect an Epson wireless POS printer
Testing the Printer
You should now be ready to test the printer by printing some text.
Troubleshooting
Connectivity Problems
http://www.beaglehardware.com/howtowireless.html[3/4/2011 12:28:11 PM]
The wireless adapter has not been configured to work on your local network. Confirm network settings using the
adapter
self
test.
There is no wireless device for the adapter to talk to. Check for the adapter's presence by looking for its IP
address or MAC address on the computer's wireless adapter or wireless router's listing of active connections.
The computer is unable to connect to the printer over the network. Test connectivity with ping and/or TMNet.
The IP address of the adapter has changed.
IP address setting is not correct. Confirm that the IP address assigned by the network is set for the wireless
adapter.
Subnet mask setting is not correct. Confirm that the subnet mask assigned by the network is set for the wireless
adapter.
The IP address is set redundantly. When the same IP address is used for more than one device in the network,
communication is not possible. Confirm the settings for the other devices. The same default IP address is set for
all wireless adapter units as the factory setting. Do not use more than one printer with the wireless adapter on the
same network without changing the IP address.
The Epson printer driver has not been installed for the wireless adapter and printer in use.
The network mode is not correct. If the computer is in the AdHoc mode, the wireless adapter must be in the
AdHoc mode. If the computer is in the Infrastructure mode, the wireless adapter must be in the Infrastructure
mode.
The network name (SSID) is not correct. In the AdHoc mode, set the same value for the names of all PCs in the
network and the network name (SSID) for the wireless adapter. In the Infrastructure mode, set the same value for
the network name (SSID) as the name of the host computer in the network. When the network authentication is
set, set it to the same setting as that of the host computer.
Check IP
settings.