Motorola CLP107e Посібник користувача - Сторінка 26

Переглянути онлайн або завантажити pdf Посібник користувача для Двостороннє радіо Motorola CLP107e. Motorola CLP107e 42 сторінки.

MN007419A01-AA

Chapter 3: Battery and Charger

3.7

Charging with the Drop-In Tray MUC-Optional Accessory

The Multi-Unit Charger (MUC) allows drop-in charging of up to six radios. Each of the six charging

pockets can hold a radio with a battery installed. The MUC provides pockets for headset storage.

Procedure:

1 Place the charger on a flat surface or mount it on the wall.

2 Insert the power cord plug into the jack on the MUC.

3 Plug the cord into an AC outlet and then into the charger.

4 Turn off the radio.

NOTICE: When charging a battery attached to radio, ensure that the radio is turned off.

You can enable or disable the radio to automatically turn off when radio is inserted into

the charger feature through Customer Programming Software (CPS).

5 Insert the radio facing down with battery installed into the charging pocket, ensuring that the

radio contacts are aligned with the MUC contacts.

NOTICE: The battery can be charged by using the slot on the flat surface of the charging

pocket.

Figure 9: Charging Radios

3.8

On the drop-in charger, the radio charging pocket has an LED Charger.

On the Multi-Unit Charger (MUC), each of the six charging pockets has an LED.

NOTICE: You can clone up to two source radios and two target radios using MUC. For more

information on cloning, see

For part number details, see

Table 6: Charger LED Indicator

Status

Battery is charging

Radio Cloning on page 31

Accessories on page

42.

LED Indication

Steady Red