Motorola clp446 Посібник користувача - Сторінка 31

Переглянути онлайн або завантажити pdf Посібник користувача для Двостороннє радіо Motorola clp446. Motorola clp446 46 сторінок. Clp series two-way radio
Також для Motorola clp446: Інструкція користувача (9 сторінок), Короткий довідник (35 сторінок)

Друкувати сторінку

What to do if cloning fails

The radio emits an audible "bonk" indicating that

the cloning process has failed. In the event that

cloning fails, try performing each of the following

before trying to start the cloning process again.

Make sure that the radio batteries on both

radios are fully charged.

Verify the cloning cable connection on both

Single Unit Chargers.

Make sure that the battery is engaged

properly on to the radio.

Make sure that there is no debris in the

charging tray or on the radio contacts.

Verify that the source radio is in cloning

mode.

Make sure that the radio to be cloned is

turned ON.

Make sure that radios are both from the

same type (same frequency band, same

region and same transmission power).

Note:

This cloning cable is designed to operate

only with compatible Motorola Drop-in Tray

Single Unit Charger. When ordering the

cloning cable, please refer to CLP Series

Cloning Cable Kit P/N HKKN4026. For

details about accessories, refer to

"Accessories" Section on page 36.

English