Epson Equity 386/20 Бюлетень підтримки продукту - Сторінка 18

Переглянути онлайн або завантажити pdf Бюлетень підтримки продукту для Робочий стіл Epson Equity 386/20. Epson Equity 386/20 19 сторінок. Product support bulletin(s)
Також для Epson Equity 386/20: Інформаційний посібник про продукт (9 сторінок), Бюлетень підтримки продукту (45 сторінок), Бюлетень підтримки продукту (45 сторінок)

APEX 100

APEX 200

NOTE:

The recommended switch settings for the OmniBridge controller are

as follows:

These settings select NO ADDRESS for the OmniBridge BIOS and

allow it to coexist with the internal FDC of the computer in which it

is being installed. This way you do not need to disable the internal

FDC or connect any cables from the OmniBridge to internal floppy

drives. This was found to be a universal setting for all of the

computers listed above as compatible with the OmniBridge controller.

The Epson APEX 100 was found compatible with the

OmniBridge controller.

two external disk drives (daisychained) together. The

external drives could be used as high density (1.2M and

1.44M) or normal (360K and 720K) disk drives.

The Epson APEX 200 was found compatible with the

OmniBridge controller.

two external disk drives (daisychained) together. The

external drives could be used as high density (1.2M and

1.44M) or normal (360K and 720K) disk drives.

1-1 DOWN

1-2 DOWN

1-3 DOWN

1-4 DOWN

It was able to support one or

2-1 DOWN

2-2 DOWN

2 - 3 U P

2 - 4 U P

PSB No: S-008B

Page: 3 of 3