Dilux AP1720 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Зовнішнє освітлення Dilux AP1720. Dilux AP1720 8 сторінок. Decorative lighting – spacing matching series

Друкувати сторінку

Installation Guide

Trim Recessed

1. Attach strip light at the center of the inner

bottom of aluminum profile.

Slot the place where the profile need to be

installed. The length of the groove is determined by

subtracting 8 mm from the actual length of the

product. It is recommended that the width be 19 mm

and the depth be greater than 6 mm. Also reserve a

DC power cord.

5. Connect the profile cable to the reserved DC

power cable, pay attention to the positive and

negative poles. Put the profile into the slot and press

it.

（AP2507B）

2. Install the front-end cap and PC cover.

4. Apply glass glue on both sides of the groove

6. After the glue is cured, the profile is firmly adhered.

The installation is complete.