Dilux AP2811 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Освітлювальне обладнання Dilux AP2811. Dilux AP2811 7 сторінок. Decorative lighting – floor recessed series

Друкувати сторінку

Installation Guide

Trim / Trimless Recessed

1. Attach the strip light to the inner bottom

of the aluminum profile, and then cover with

the PC cover.

3. Slot the area where the aluminum profile is to be

installed (refer to the slot size, AP2011: width 20mm.

depth 11mm; AP2811: width 22mm. depth 11mm).

Preset DC power at one end of the mounting slot

and glue on the bottom of the mounting slot

5. After the glue is cured, the profile is firmly adhered.

The installation is completed.

（ AP2811 / AP2011 ）

2 Cover with the PC cover, then fix the two end caps

at the two ends of the aluminum profile with screws.

4. Connect the DC cable of the profile to the preset

DC power supply, place the profile into the mounting

slot, and press it into the slot.