Motorola CONNECT40 Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Радіоняня Motorola CONNECT40. Motorola CONNECT40 48 сторінок. 5" hd w i-fi video baby and home monitor
Друкувати сторінку
3. Using the Baby Monitor
Please read these instructions carefully, and be aware that this baby monitor is
only intended as an aid. It is not a substitute for responsible adult supervision.
3.1
Setting Up
• Make sure that the Baby Unit and Parent Unit are both switched on.
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
NOTE
Do not place the Baby Unit within reach of a child or baby! If there is
interference with the picture or sound, try moving the units to different locations,
and ensure that they are not close to any other electrical equipment.
If you place the Parent Unit and Baby Unit too close together, you may hear a
high pitched noise. This is not a fault. The units are designed to be operated at
some distance apart. So move the units further apart.
3.2
Power On or Off the Baby Unit
Slide the Power
ON
The power indicator lights up in blue.
Slide the Power
ON
Unit. The power indicator goes off.
3.3
Power On or Off the Parent Unit
Press and hold the Power 0 button to switch on the Parent Unit. The power
indicator lights up in green.
Press and hold the Power 0 button to switch off the Parent Unit. The power
indicator goes off.
3.4
Night Vision Mode
The Baby Unit has high-intensity infrared LEDs for picking up clear images in the
dark. When the built-in light sensor on the side of the Baby Unit detects a low
level of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
screen.
Using the Baby Monitor
switch to the ON position to switch on the Baby Unit.
OFF
switch to the OFF position to switch off the Baby
OFF
icon will be displayed on the
12