Motorola C1003LBI Початок роботи

Переглянути онлайн або завантажити pdf Початок роботи для Бездротовий телефон Motorola C1003LBI. Motorola C1003LBI 2 сторінки. C1lbi series

Друкувати сторінку

Digital Cordless Telephone

Motorola C1LBI

For C1001LBI, C1002LBI, C1003LBI and C1004LBI

Warning: Charge the handset for 24 hours before use.

1. Getting started

IMPORTANT

Do not place your C1LBI in the bathroom or other humid areas.

Location

You need to place your C1LBI base within 2 metres of the mains power and from the telephone

wall socket so that the cables will reach. The socket-outlet should be installed near the equipment

and should be easily accessible.

Make sure that it is at least 1 metre away from other electrical appliances to avoid interference.

Your C1LBI works by sending radio signals between the handset and base. The strength of the

signal depends on where you place the base. Placing it as high as possible ensures the best

signal.

HANDSET RANGE

The unit has a range of up to 300 metres outdoors when there is a clear line of sight between

the base and handset. Any obstruction between the base and handset will reduce the range

significantly. With the base indoors and the handset either indoors or outdoors, the range will

normally be up to 50 metres. Thick concrete and stone walls can severely affect the range.

SIGNAL STRENGTH

The

icon on your handset indicates that you are within range of the base. When out of range

of the base, the

icon flashes. If you are on a call, you will hear a warning beep.

The line will hang up if the handset moves out of range of the base. Move closer to the base. The

handset will automatically reconnect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all times. Do not connect the

telephone line cord into the wall socket until the handset is fully charged. Use only the power

adaptor and telephone line cord supplied with the product.

Connecting the base

1. Plug the telephone line cord into the socket marked

on the underside of the base.

2. Plug the power adaptor into the socket marked

on the underside of the base and plug the

other end into the mains power wall socket. Switch on the mains power.

Installing and charging the handset

1. Remove the battery cover from the back of the handset and insert the rechargeable Ni-MH

battery cells supplied. Please note the '+' and '-' markings inside the battery compartment

and insert in the correct direction.

2. Slide the battery cover back into place.

Handset LCD Display

Battery

status

Scrolls

when

charging

Time or Handset name

In standby mode, press and hold to switch handset

idle screen between handset name or time.

Flashes to indicate an incoming external call.

External call in progress.

Flashes to indicate an incoming internal call.

Internal call in progress.

3-way call in progress or transfer an external call to another C1LD handset registered to the

base.

Flashes to indicate new voicemail messages received. Off when you have no voicemail

messages.

Indicates signal strength.

Flashes when handset is not registered to the base or if you go out of range.

Menu is opened.

Phonebook is opened.

Flashes to indicate new calls list entries received.

Answered call (when viewing the Calls list).

Unanswered call (when viewing the Calls list).

Keypad is locked.

Displayed number is longer than 12 digits.

The approximate power levels of your battery are indicated as follows:

Battery is fully charged.

Battery is partially charged.

Battery is running low.

Flashes when battery is almost fully discharged.

This feature is dependent on your Network Service provider supporting the service. A

subscription fee may be payable.

For this feature to work, you must subscribe to Caller ID Service from your network operator. A

subscription fee may be payable.

NOTE

If the caller's number exactly matches an entry stored in the phonebook, the name is displayed.

Press

to see the caller's number.

3.6.2

Copy a Redial list number to the phonebook

1. Press

to open the Redial list.

2. Scroll

to the entry you want.

3. Press

. The display shows

ADD

4. Press

again. The display shows NAME.

5. Enter the name and press

. The number is displayed.

6. Edit the number if necessary, then press

7. Press

to select the ringer melody you want and press

. The number is stored.

3.6.3

Delete an entry

1. Press

to open the Redial list.

2. Scroll

to the entry you want and press

. The display shows

DELETE

If the number is a match to a phonebook entry and the name is displayed, press

display the number and then press

and the display will show

DELETE

3. Press

to confirm or

to cancel.

3.6.4

Delete the entire Redial list

1. Press

to open the Redial list.

2. Press and hold

. The display shows

DELETE ALL

3. Press

to confirm or

to cancel.

3.7

Lock / unlock the keypad

You can lock the keypad so that it cannot be operated accidentally while carrying it around.

NOTE

When the keypad is locked, you can still answer incoming calls and operate the handset as

normal. When the call ends, the keypad lock comes on again.

1. Press and hold

icon is displayed.

2. To unlock the keypad, press any key on your handset. The display shows

PRESS

3. Press

within 5 seconds.

Manufactured, distributed or sold by Suncorp Technologies Ltd., official

licensee for this product. MOTOROLA and the Stylized M Logo are

trademarks or registered trademarks of Motorola Trademark Holdings,

LLC. and are used under license. All other trademarks are the property

reserved.

Version 1 (IN)

3. If you are charging the batteries for the first time, place the handset on the base to charge for

at least 24 hours continuously.

4. When the handset is fully charged, the

icon will appear steady on the display. Plug the

other end of the telephone line cord (make sure that one end is already plugged into the

base) into the telephone wall socket.

Connecting the handset and charger

(for multi-pack only)

If you have purchased a multiple pack, you will need to carry out this process for all the handsets

and chargers.

1. Plug the power adaptor into the socket marked

on the underside of the charger and plug

the other end into the mains power wall socket.

2. Remove the battery cover from the back of the handset and insert the 2 x AAA Ni-MH

rechargeable batteries supplied. Please note the '+' and '-' markings inside the battery

compartment and insert in the correct direction.

3. Slide the battery cover back into place.

4. If you are charging the batteries for the first time, place the handset on the charger to charge

for at least 24 hours continuously.

5. When the handset is fully charged, the

icon will appear steady on the display. The

display will show

HANDSET

and handset number (e.g. 2) to indicate that it is registered to the

base.

IMPORTANT

Warning! Use only the approved rechargeable Ni-MH battery cells supplied with your C1LBI.

BATTERY LOW WARNING

If the

icon flashes on the display and you hear a warning beep every minute during a call,

you will need to recharge the handset before you can use it again.

When charging, the

icon will scroll on the display.

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give up to 7 hours talk time or up to 150 hours

standby time on a single charge.

Note that new batteries do not reach their full capacity until they have been put to normal use for

several days.

To keep your batteries in the best condition, leave the handset off the base for a few hours at a

time.

Running the batteries right down at least once a week will help them last as long as possible.

Navigating the menus

Your C1LBI has an easy to use menu system.

Each menu has a list of options, which you can see on the menu map on the following page.

When the handset is switched on and in standby:

1. Press

to open the main menu.

2. Then use

buttons to scroll through the available options.

3. Press

to select an option. To return to the previous menu level, press

menu and return to standby, press

NOTE

If no buttons are pressed for 30 seconds, the handset returns to standby automatically.

Menu map

PHONEBOOK

HANDSET

ADD ENTRY

BEEP

MODIFY ENTRY

KEYTONE

DELETE ENTRY

LOW BATTERY

SETUP

OUT RANGE

BASE VOLUME

INT RING VOL

BASE MELODY

EXT RING VOL

DEL HANDSET

INT MELODY

PIN CODE

EXT MELODY

DIAL MODE

AUTO ANSWER

FLASH

NAME

DEFAULT

KEYLOCK ?

AREA CODE

3.8

Paging / Find handset

You can alert a handset user that they are wanted or locate a missing handset.

Paging calls cannot be answered by a handset.

1. Press

on the base. All handsets registered to the base will ring.

2. To stop the ringing, press

on the base again or press any button on the handset.

4. Phonebook

You can store up to 50 names and numbers in the phonebook. Names can be up to 16 characters

long and numbers up to 24 digits. You can also select different ringer melodies for the phonebook

entries.

4.1

Store a name and number

If the C1LBI is connected to a switchboard, you may need to enter a pause in a stored number.

This gives the switchboard time to find an outside line. A pause is normally stored after the

switchboard access code (e.g. 9).

When storing a number, press and hold

, the display shows P. You can then continue storing

the phone number.

If you have subscribed to Caller ID Service and wish to display the name of your caller instead of

the number, save the full telephone number including the area code to your phonebook.

You can store multiple entries with the same number. However, to prevent unnecessary

duplicated entries, you can only store the same name once.

1. Press

. The display shows PHONEBOOK.

2. Press

. The display shows

ADD

ENTRY.

3. Press

. The display shows NAME.

4. Enter the name and press

. The display shows NUMBER.

5. Enter the number and press

. The display shows

6. Press

to select the ringer melody you want and press

The display shows

ADD

ENTRY.

7. Enter the next name and number entry that you wish to store in your phonebook or press

to return to standby.

ENTERING NAMES

Use the keypad letters to enter names, e.g. to store TOM:

Press

once to enter T.

Press

three times to enter O.

Press

once to enter M.

Welcome...

to your new Motorola C1LBI Digital Cordless Telephone!

•

All handsets are fully cordless for locating anywhere within range.

•

50 name and number phonebook.

•

Caller ID shows you who's calling and see details of the last 40 callers in a Calls list.

•

Bright backlit display.

•

Redial up to 10 of the last numbers called.

•

bases.

•

Make internal calls and transfer external calls between handsets.

•

Choose from 5 different ringtones for internal and external calls as well as numbers stored in

the phonebook.

Please note that this equipment is not designed for making emergency telephone calls when

the power fails. Alternative arrangements should be made for access to emergency services.

Need help?

If you have any problems setting up or using your C1LBI, please contact Customer Services

on 1800 2700 361.

Alternatively, you may find the answer in the 'Help' section at the back of this guide.

You must subscribe to your network provider's Caller ID or Call Waiting service for these

features to work. A subscription fee may be payable.

The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the

handset less talk / standby time. Eventually they will need to be replaced.

After charging your handset for the first time, subsequent charging time is about 6–8 hours a day.

Batteries and handset may become warm during charging. This is normal.

All talk and standby times are approximate and depend on features selected and usage pattern.

Date and time

If you have subscribed to a Caller ID Service, the date and time is set automatically for all handsets

when you receive your first call.

If you do not have a Caller ID service, you can set the date and time manually.

Set the date manually:

1. Press

, scroll

DATE -- TIME

2. Press

to select.

3. Enter the date (e.g. 12 / 08 / 15 for 12th of August 2015) and press

Set the time manually:

1. Press

, scroll

DATE -- TIME

2. Scroll

CLOCK SET

and press

3. Enter the time in 24 hour format (e.g. 18--30 for 6:30pm) and press

Your C1LBI is now ready for use.

Underside of the base

A Page

In standby mode, press to ring the handset(s).

Press and hold to enter registration mode when registering handsets.

3. Using the phone

NOTE

Your handset will automatically time the duration of all external calls. The call timer will display

after the first 15 seconds of your call. When the call ends, the total duration of your talk time is

shown for 5 seconds.

3.1

Switch the handset on / off

Press and hold

to switch the handset on or off.

. To exit the

3.2

Calls

3.2.1

Make a call

1. Press

2. Dial the number.

3.2.2

Preparatory dialling

1. Dial the number first. If you make a mistake press

DATE -- TIME

DATE SET

2. Press

to dial.

CLOCK SET

3.2.3

End a call

ALARM SET

Press

, or place the handset back on the base or charger.

3.2.4

Receive a call

SELECT BASE

When you receive an external call, the phone rings and

REG BASE

1. If the handset is off the base then press

simply lift the handset to answer the call.

NOTE

If you prefer to press

when you lift up the handset to answer a call, you will need to switch

Auto answer off.

3.3

Adjust the earpiece volume

During a call, press

to increase or decrease the volume. There are 5 levels to choose

from.

3.4

Mute

You can mute your handset so that you can talk to someone nearby without your caller hearing.

1. During a call, press

. The display shows

2. Press

again to resume your call.

WRITING TIPS

Press

to delete the last character or digit.

Press

to move between characters.

Press

to insert a space.

Press

twice to insert a dash.

4.2

View or dial an entry

1. Press

icon is displayed.

2. Scroll

to the entry you want.

Enter the first letter of the name to search alphabetically.

The first name that starts with this letter or the nearest letter in the alphabet will be displayed.

Scroll

to the entry you want.

3. Press

to dial or

to return to standby.

NOTE

When the name is displayed, you can switch between the name and number by pressing

4.3

Edit a name and number

1. Press

. The display shows PHONEBOOK.

2. Press

. The display shows

3. Scroll

MODIFY ENTRY

4. Scroll

to the entry you want to edit, or search alphabetically and press

existing name is displayed.

5. Press

to delete the name if required, then enter the new name and press

existing number is displayed.

MELODY

6. Press

to delete the number if required, then enter the new number and press

7. Scroll

to select a new ringer melody and press

8. Press

to return to standby.

This user guide provides you with all the information you need to get the most

from your phone.

To set up your phone, follow the simple instructions in 'Getting Started', on the

next few pages.

IMPORTANT

Only use the telephone line cord supplied.

Got everything?

•

C1LBI base & cordless handset

•

2 x rechargeable Ni-MH battery cells

•

Power adaptor for the base

•

Telephone line cord

If you have purchased a C1LBI multiple pack you will also have the following additional

items:

•

Cordless handset & charger

•

2 x rechargeable Ni-MH battery cells

•

Power adaptor for the charger

2. Getting to know your phone

Overview of your handset

Scroll Up / Volume Up / Calls

List

During a call, press to increase

earpiece volume.

When the phone is ringing,

press to increase the handset

ringer volume.

Press to scroll through the

menu options, redial list, calls

list and phonebook entries.

and press

. The display shows

DATE

SET.

In standby mode, press to open

the calls list.

Menu / OK

to confirm.

Press to open the Menu.

Press to select menu

options and to con rm a

and press

displayed option.

Talk / End Call

Press to make,

to confirm.

receive and end a

call.

* / Switch from Pulse to

Tone

Dial a *.

During a call, press and

hold to switch from pulse

dialling to tone dialling.

Recall / Switch Handset

on / o

Use with switchboard /

PABX services and some

network services.

Press and hold for 3

seconds to switch the

handset on / o .

3.5

3.5.1

If you have more than one handset registered to the base, you can make internal calls between

two handsets.

icon is displayed to indicate an internal call.

1. Press

3.5.2

When you receive an internal call,

displayed.

1. Press

3.5.3

You can transfer an external call to another handset registered to the base.

During an external call:

to delete the last digit.

1. Press

2. When the other handset answers, press

NOTE

If there is no answer from the other handset and you wish to return to your external caller, press

. Your external call resumes automatically after 60 seconds if there is no answer.

icon flashes on the display.

3.5.4

You can hold a 3-way conference call between 2 internal callers and 1 external caller.

to answer the call, or if the handset is on the base

During a call with an external caller:

1. Press

2. When the other handset answers press and hold

is displayed.

3. If there is no answer from the other handset, press

4. Press

3.6

The last 10 entries dialled are stored in the redial list.

3.6.1

MUTED

and your caller cannot hear you.

1. Press

2. Scroll

3. Press

4.4

1. Press

2. Press

3. Scroll

4. Scroll

display shows

5. Press

5. Handset settings

5.1

When you press a button on the handset keypad, you will hear a beep. You can switch these

beeps on or off.

1. Press

2. Press

3. Press

4. Press

5.2

When the battery is almost fully discharged, you will hear a warning beep every minute during a

ADD

ENTRY.

call. You can switch these beeps on or off.

and press

1. Press

. The

2. Press

3. Scroll

. The

4. Press

5.3

If the handset goes out of range, you will hear warning beeps during a call. You can switch these

. The display shows

ADD

ENTRY.

beeps on or off.

1. Press

2. Press

3. Scroll

4. Press

Display

Scroll Down / Volume Down /

Earpiece

Calls List

During a call, press to decrease

earpiece volume.

When the phone is ringing, press

to decrease the handset ringer

volume.

Press to scroll through the menu

options, redial list, calls list and

phonebook entries.

In standby mode, press to open

the calls list.

Mute / Delete / Back

During a call, press to turn mute

on / o .

In editing mode, press to delete

characters and digits.

Go back to the previous menu

level.

Phonebook / Exit

In standby mode, press to open

the phonebook menu.

When viewing the redial / calls

list / phonebook or when in the

menu, press to exit and return to

standby.

Pause / # / Keypad lock

Press and hold to enter a

pause (P) when pre-dialling

or storing numbers.

Dial a #.

Press and hold for 3

seconds to lock the

keypad.

To unlock press any key

and then press #.

Redial

In standby mode, press

Intercom

to open the redial list.

Microphone

Used to make internal calls

and transfer calls to other

C1LBI handsets registered

to the base.

Intercom

Make an internal call

followed by the number (1-4) of the handset you want to call.

Receive an internal call

icon flashes and the handset number that is calling you is

to answer the call.

Transfer a call

followed by the handset number (1-4) that you want to transfer to.

to complete the transfer.

3-way conference call

followed by the handset number (1-4) that you want to establish a conference call.

to connect all three callers.

to return to your external caller.

to end the call.

Redial

View or dial an entry

to open the Redial list.

to the entry you want.

to dial the displayed entry or press

to return to standby.

Delete an entry

. The display shows PHONEBOOK.

. The display shows

ADD

ENTRY.

DELETE ENTRY

and press

to the entry you want to delete, or search alphabetically and press

CONFIRM

to confirm or

to return to standby.

Key beep

, scroll

HANDSET

and press

. The display shows BEEP.

to select. The display shows KEYTONE.

to select.

to select

OFF

and press

to confirm.

Battery low warning beep

, scroll

HANDSET

and press

. The display shows BEEP.

to select.

LOW BATTERY

and press

to select

OFF

and press

to confirm.

Out of range warning beep

, scroll

HANDSET

and press

. The display shows BEEP.

to select.

OUT RANGE

and press

to select

OFF

and press

to confirm.

icon

. The