ARGtek ARG-1220 Посібник зі швидкого встановлення - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Бездротовий маршрутизатор ARGtek ARG-1220. ARGtek ARG-1220 12 сторінок. Wlan dual band ap router for 802.11a/b/g/n
Також для ARGtek ARG-1220: Посібник зі швидкого встановлення (14 сторінок)
Друкувати сторінкуprovides two types of Internet connection:
wireless(3G/3.5G USB modem) or wired (xDSL / cable modem) connection.
You can access internet via USB 3G/3.5G modem card, or via wired xDSL / cable modem
connection. However, only one connection can be used at the same time.
You will need to configure your network for the very first time and whenever you want to
change configurations via web interface. To make the network configurations, you have to
connect computer to one of the LAN port and open your web browser.
The AP Router is delivered with the following factory default parameters on the Ethernet LAN
interfaces.
Default IP Address: 10.10.10.254
Default IP subnet mask: 255.255.255.0
Web login User Name: admin
Web login Password: admin
The device has two operation modes (Gateway/Bridge).
The default IP addresses for the device are 10.10.10.254,
so you need to make sure the IP address of your PC is in the same subnet as the device,
such as 10.10.10.X.
It will take about 55 seconds to complete the boot up sequence after power on.
You can refer to user manual for the details of how to configure your network.
ARGtek Communication Inc.
www.argtek.com
E-Mail:
Tel:+ 886-2-2999-6958
Fax :+ 886-2-2999-7742