Motorola C602 Посібник користувача - Сторінка 29
Переглянути онлайн або завантажити pdf Посібник користувача для Бездротовий телефон Motorola C602. Motorola C602 39 сторінок. Digital cordless phone
Також для Motorola C602: Інструкція з експлуатації (44 сторінок), Посібник (39 сторінок)
Друкувати сторінку
9. Using additional handsets
You can register up to five handsets to your C6A base to
extend your phone system without having to install extension
sockets for each new phone.
Each C6A handset can be registered with up to four bases.
You can then select the base you prefer to use.
If you have purchased a C6A multiple pack, all additional
handsets come pre-registered to the base.
If you have purchased an additional handset separately, you
must register it to your C6A base before it can be used.
9.1
Registering an additional handset
NOTE
Handset batteries must be fully charged before you start to
register. Hold your handset close to the base during the
registration process.
Handsets that were supplied with your C6A base are already
pre-registered.
On the base:
p
1. Press and hold
for 3 seconds until you hear two
beeps. The base will remain in registration mode for 90
seconds.
28
On the handset:
m
d
1. Press
, scroll
to
d
REG BASE
2. Scroll
to
and press
3. Enter the base number (1 - 4).
The base numbers that are already in use flashes. The
SEARCHING...
display shows
4. When the handset finds the base signal, the display
SEARCHING...X
shows
, where
identification number.
5. The display will ask for the PIN to be entered. Enter the
4 digit PIN code (default = 0000) and press
You will hear a beep if the registration is successful.
The handset is automatically assigned an available
handset number. Use this number when making
internal calls.
NOTE
If registration is not successful the first time, please repeat
the process again in case the base registration period ran
out of time. If the base is not found after a few seconds, the
handset returns to standby. Try registering again.
If there are already 5 handsets registered to the base, the
registration will fail. You must de-register another handset
before you can register a new one.
m
REGISTER
and press
.
m
.
.
X
indicates the base
m
Using additional handsets
.