Motorola CD303 Посібник користувача - Сторінка 38

Переглянути онлайн або завантажити pdf Посібник користувача для Бездротовий телефон Motorola CD303. Motorola CD303 48 сторінок.

10. Using additional handsets

Up to 5 handsets can be registered to one base station. Additional handsets must be

registered to the base before you can use them.

•

The instructions described below apply specifically to the CD3 handset. If you wish to

refer to the instruction manual of the additional handset.

•

The System PIN is required to register or unregister handsets. The default PIN is 0000.

10.1

NOTE

Handset batteries must be fully charged before you start to register. Hold your handset

close to the base during the registration process. Handsets that were supplied with your

CD3 base are already preregistered.

On the base:

1. Press and hold

registration mode for 90 seconds.

On the handset:

1. Press Menu, scroll

3. Bases are displayed. If necessary, scroll

CD3 handset to and press Select.

4. Enter the system PIN and press OK.

5. The display shows

6. When registration is successful the display shows

confirmation beep.

NOTE

If registration is not successful the first time, please repeat the process again in case the

base registration period ran out of time. If the base is not found after a few seconds, the

handset returns to standby. Try registering again.

If there are already 5 handsets registered to the base, registration will fail. You must de-

10.2

IMPORTANT

DECT GAP Profile only guarantees that basic calling functions will work correctly between

different makes / types of handset and base. There is a possibility that certain features

such as Caller ID will not work correctly.

until the base emits a double beep. The base will remain in

Registration

and press Select.

is highlighted. Press Select.

Searching Base

to a new base you wish to register the

Handset Registered

Using additional handsets

and you hear a