Motorola CD4 Series Посібник - Сторінка 29
Переглянути онлайн або завантажити pdf Посібник для Бездротовий телефон Motorola CD4 Series. Motorola CD4 Series 49 сторінок. Digital cordless telephone with answering machine
Також для Motorola CD4 Series: Посібник із швидкого старту (13 сторінок)
Друкувати сторінку
6. Enter the number you want it replaced with.
M
7. Press
to confirm or
7.5
Flash time
Depending on your country and network operator, your phone has the flash
time set as long. It is unlikely that you need to change this setting unless
advised to do so.
M
1.
Press
, scroll
d
Flash time
2. Scroll
to
i
d
to select 100ms,
3. Press
or
7.6
Dial mode
Your phone is set to tone dialling. You should only need to change this if
connected to an older type of switchboard / PBX which requires pulse dialling.
M
1.
Press
, scroll
d
2. Scroll
to
Dial mode
i
d
3. Press
or
to select
7.7
Switch Auto clock on / off
If you have subscribed to Caller ID Service, the date and time will be set on all
your handsets whenever a call is received. This feature can be set to On or Off.
M
1.
Press
, scroll to
d
Auto clock
2. Scroll
to
d
On
3. Scroll
to
7.8
Registration
Up to 4 handsets can be registered to one base station. Additional handsets
must be registered to the base before you can use them.
•
The instructions described below apply specifically to your handset. If you
wish to register another manufacturer's handset, the instructions may vary.
In this case, please refer to the manufacturer of the additional handset.
•
The Master PIN is required before you can register or unregister handsets.
The PIN is 0000.
7.8.1
Register a handset
At the base:
1.
Press and hold the f button on the base until you hear a beep. You have
120 seconds in which to register a handset.
At the handset:
1.
If the handset is not already registered to a base, press
2. Or if the handset is already registered to a base, press
Advanced Set
and press
3. When the display shows PIN, enter the base PIN and press
When the handset registers with the base, it is assigned a handset number.
Advanced settings
e
to return to standby.
d
to
Advanced Set
M
and press
250ms
d
Advanced Set
to
M
and press
Tone
or
Pulse
Advanced Set
and press
Off
or
then press
M
. Scroll
M
and press
.
.
600ms
or
and press
M
and press
.
.
M
and press
M
and press
.
M
.
M
to confirm.
Register
d
to
and press
M
to confirm.
to confirm.
M
.
M
M
d
scroll
to
.
M
.
29