Motorola D1011 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Бездротовий телефон Motorola D1011. Motorola D1011 30 сторінок. Motorola d1010 series digital cordless phone with answer machine
Також для Motorola D1011: Посібник користувача (35 сторінок)

Друкувати сторінку

1. Getting started

WARNING

Do not place your D1010 in the bathroom or other humid areas.

Location

You need to place your D1010 base within 2 metres of the mains power socket and telephone

socket so that the cables will reach.

Make sure it is at least 1 metre away from other electrical appliances to avoid interference. Your

D1010 works by sending radio signals between the handset and base. The strength of the signal

depends on where you place the base. Putting it as high as possible ensures the best signal.

HANDSET RANGE

The D1010 has a range of up to 300 metres outdoors when there is a clear line of sight between

the base and handset. Any obstruction between the base and handset will reduce the range

significantly. With the base indoors and handset either indoors or outdoors, the range will normally

be up to 50 metres. Thick stone walls can severely affect the range.

SIGNAL STRENGTH

The

icon on your handset indicates when you are in range. When out of range of the base,

the screen shows SEARCHING and the

flashes.

If you are on a call, the line will hang up if the handset moves out of range of the base. Move back

within in range. The handset will automatically re-connect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all times. Do not connect the telephone

line cord into the wall socket until the handset is fully charged. Only use the power and telephone

cables supplied with the product.

WHICH POWER ADAPTOR?

The power adaptor with a clear connector is for the base unit and the power adaptor with a red

colour connector is for the charger unit.

Getting started

Connecting up the base

Plug the mains power cable with the clear connector into the socket marked

underside of the base and plug the other end into the mains power wall socket and switch the

power on.

Connecting the handset and charger (Multi-pack only)

If you have purchased a multiple pack, this process will need to be carried out for all handsets and

chargers:

1. Plug the mains power cable with the red connector into the socket marked

underside of the charger.

2. Insert the 2 x AAA NiMH batteries supplied into the handset. Then slide the compartment

cover into place.

on the