Motorola CB PRO Посібник користувача
Переглянути онлайн або завантажити pdf Посібник користувача для Радіо Motorola CB PRO. Motorola CB PRO 2 сторінки. Alpha series radio
Друкувати сторінку
Attaching and Removing the Antenna
Attaching and Removing the Battery
Battery
Clasp
Antenna Connector
Threaded End
of Antenna
To Attach Battery
To Attach Antenna
1.
Fit the battery slots with the grooves on the radio.
1.
Fasten the antenna to the radio by placing the threaded end of
2.
Slide the battery upwards until a click is heard.
the antenna into the Antenna Connector.
To Remove Battery
2.
Rotate the antenna clockwise until tight.
1.
Slide the battery clasp away from the radio.
To Remove Antenna
2.
Slide the battery downwards.
1.
Turn the antenna in a counter-clockwise direction until it dis-
engages from the radio.
3.
Pull the battery away from the radio.
Attaching and Removing the Belt Clip
Release Tab
Grooves
Mounting Grooves
To Remove Belt Clip
Battery Slots
1.
Insert the end of a key between the release tab and the back
surface of the radio.
2.
Lift the release tab.
3.
Slide the belt clip upwards.
To Attach Belt Clip
1.
Align mounting rails of the radio with the grooves of the belt
clip.
2.
Slide the belt clip downwards until it clicks into place.
Charging your Radio
© 2002, 2003, 2004 by Motorola, Inc.
Motorola Technology Sdn. Bhd. (Co. No. 455657-H)
Plot 2, Bayan Lepas Technoplex Industrial Park,
Mukim 12, S.W.D.,11900 Penang, Malaysia
Printed in Malaysia. 12/04. All Rights Reserved.
Charger
Pocket
1.
Turn off your radio and the A/C power supply to your charger
(if they are turned on).
2.
Place your radio in the charger pocket.
3.
Turn on the charger's A/C power supply.
4.
Charge your radio until the charger's LED shows a steady
green light (around 2 hours later).
5.
Turn off the charger's A/C power supply, and remove the
radio from the charger pocket.
6.
Turn on your radio; you should see all 3 bars of the Battery
Level Indicator illuminated.
*6804113J11*
6804113J11-B