Motorola CM160 Посібник користувача - Сторінка 33
Переглянути онлайн або завантажити pdf Посібник користувача для Радіо Motorola CM160. Motorola CM160 46 сторінок. Commercial series controlhead
Також для Motorola CM160: Посібник користувача (5 сторінок), Сервісна інформація (26 сторінок), Базовий посібник користувача (12 сторінок)
Друкувати сторінку
MAKE A PHONE CALL D
Press the preprogrammed Phone button and
proceed to step 6.
– or –
Press the PTT button, and if the Hot Keypad feature
has been preprogrammed by your dealer, do the
following:
G
H
1
or
to select a channel that has been
programmed for telephone.
D
2
to enter menu mode.
G
H
PHONE
3
or
until
D
PHONE
4
to select
5
Your dealer can preprogram your radio in one
of three ways to enter your access code to the
repeater.
Immediate Auto – automatically sends the
access code.
Delayed Auto – your radio will transmit the
access code upon a PTT button press.
Manual - Press and hold the microphone PTT
and enter your access code using the DTMF
microphone keypad. Release the microphone
PTT on completion.
6
When you hear a dial tone:
XXXXXXX
Enter the phone
number using the
DTMF microphone
keypad.
The number will scroll
to the left,
– or –
G
H
XXXXXXXX
or
to select a
number from the
phone list. (Only the
first 8 digits are
displayed.)
– or –
a. Press and release the preprogrammed
Speed Dial button.
b. Press the key (0 to 9) corresponding to
the number you want to call.
7
To redial the last number dialed (if not using
Speed Dial), press and release the PTT
button immediately after the access code is
sent. The radio sends the last number dialed.
– or –
31
English