Motorola TN20 - MOTONAV - Automotive GPS Receiver Інструкція з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Радіо Motorola TN20 - MOTONAV - Automotive GPS Receiver. Motorola TN20 - MOTONAV - Automotive GPS Receiver 3 сторінки. Tn20 - quick start guide (spanish)
Також для Motorola TN20 - MOTONAV - Automotive GPS Receiver: Посібник користувача (9 сторінок), Посібник користувача (20 сторінок), (Короткий посібник для початківців (9 сторінок)

GPS Navigation Device Upgrade Instructions

1. Ensure the MOTONAV GPS Navigation Device is fully charged.

2. Power-down the MOTONAV Device by holding the power button for at least 8 seconds,

until the charging LED indicator blinks.

3. Insert the SD memory card into the SD card slot of the MOTONAV GPS Navigation

Device.

Note: This step is not necessary if the memory card is already installed in your

MOTONAV GPS Navigation Device (option 3 was selected from Step 2 above).

4. Power-on the MOTONAV GPS Navigation Device. The software upgrade will begin

automatically. Select "Yes to All" if prompted.

5. The full upgrade process can take up to 15 minutes.

6. When the software upgrade is complete, the MOTONAV GPS navigation device will

automatically transition to either the "Map" screen or the "Language Settings" screen,

depending on the state of your device.

7. Remove the SD memory card from your MOTONAV GPS navigation device.

The software upgrade procedure is now complete. Your MOTONAV GPS navigation device

is ready for use.

If you experience any problems with this upgrade procedure, please contact Motorola

Consumer Care at 1.866.289.6686.