Epson LABELWORKS LW-PX300VP Посібник оператора - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник оператора для Виробник етикеток Epson LABELWORKS LW-PX300VP. Epson LABELWORKS LW-PX300VP 14 сторінок.

Initializing this Product

The product may stop functioning due to static electricity or other causes.

Initialize the product if it does not operate normally such as the display is

interrupted.

Initialize the product. Take extreme care before initializing it.

All the created text will be deleted. The settings you made for

character input will return to the default.

1. Press

2. Press and hold

, and press

3. When a message appears, press

The product will be initialized.

To abort: Press any button other than

Cleaning

When the exterior is dirty

Wipe the dirt off with a soft cloth. If it is very dirty, use a cloth wrung out of water.

Never use chemicals or solvents such as benzine, thinner, or

alcohol, or use a chemical duster.

When the printhead is dirty

If the print becomes faint or some parts

are missing, there may be some dirt on the

printhead.

Clean the print head with a cotton swab

moistened with medical alcohol (commercially

available ethanol).

If none of the above has solved the problem or symptom is different

than listed above, contact the Epson Labelworks Customer Support

Center at 800-622-6312 or visit support at Labelworks.Epson.com