Motorola GP68 Посібник з монтажу та експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Портативний радіоприймач Motorola GP68. Motorola GP68 44 сторінки. A high performance radio in a class of its own
Також для Motorola GP68: Посібник з експлуатації (19 сторінок), Посібник (18 сторінок), Посібник з експлуатації (13 сторінок), Посібник з експлуатації (20 сторінок)

Model ST-865M3 SmarTrunk II™ Logic Board

The subscriber is alerted to an incoming call by ringing of the subscriber

equipment. This alerting takes four forms, related to the type of incoming

call.

A long single high frequency ring is generated by the logic board,

then a low frequency dual tone ring is generated by the controller.

This indicates an incoming landline call.

A short double high frequency ring is generated by the logic board,

then a low frequency dual tone ring is generated by the controller.

This indicates an incoming call from another SmarTrunk II radio

subscriber.

A short single high frequency ring is generated by the logic board,

then a double beep is generated by the controller. This indicates a

manually dialed group call.

A short single high frequency ring is generated in the calling radios

logic board, then a double beep is generated by the controller. This

indicates a (PTT) dispatch group call.

For items a and b, the subscriber must press * on the DTMF keypad to

answer the incoming call (Push-to-talk (PTT) is not pressed). For items c

and d, the subscriber may communicate with other members of the group

by pressing PTT (no answer action is required).

Call routing codes are used for initiating a call from a subscriber to the

appropriate destination. Call routing codes are commonplace in PBX

telephone systems. For example, to place a call to an outside telephone

line through a PBX, a call routing code of typically 0 or 9 must be dialed

first. The SmarTrunk II system operates in a similar fashion, however, the

call routing code is placed at the end of the calling sequence.

The following table describes all the call routing codes. The subscriber

needs to be familiar only with the call routing codes that apply to their

application.