Motorola GP68 Посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Портативний радіоприймач Motorola GP68. Motorola GP68 20 сторінок. A high performance radio in a class of its own
Також для Motorola GP68: Посібник з монтажу та експлуатації (44 сторінок), Посібник з експлуатації (19 сторінок), Посібник (18 сторінок), Посібник з експлуатації (13 сторінок)

Друкувати сторінку
Motorola GP68 Посібник з експлуатації
When programmed to do so, your GP-68 will quickly SCAN the channels you want it
to.
To Scan Channels
1.
Press
(SCAN/D) momentarily to begin channel
scanning.
When the 'SCAN' indicator flashes. channel scanning is in
progress and the 'Home' channel is displayed (until activity is
received on another channel).
2.
Initially, the channels are scanned in an increasing order
(from lowest to highest). To scan in a decreasing order, rotate
the selector switch counter-clockwise To change the direction
back to an increasing order rotate the selector switch clockwise.
The radio scans through all channels that are in the scan list If
receive activity is detected on a channel, the 'SCAN' indicator
remains on, the channel number is displayed and the
conversation can be heard, provided the PL/DPL code (if
required) is correct for that channel.
The display reverts to the 'Home' channel and scanning resumes when activity is
over and a 7 second 'hang time' has expired.
3.
To stop scan operation, press
The 'SCAN' indicator turns off to indicate scanning is terminated and the radio
displays the 'Home' channel.
To Transmit During Scanning
1.
When keying the radio corresponding to a received message during channel
press PTT as you normally would.
Talk Back Scan
The Talk Back Scan feature is used when PTT is pressed while the radio has
stopped on a channel. When transmit or receive activity ceases on a scanned
channel, a "hang time" of approximately 7 seconds occurs prior to the radio
resuming scan. This hang time gives the radio time to receive again or gives you
time to respond to a call on the locked channel before scanning resumes.
Home Revert Scan
If you press PTT while the he radio is scanning (i.e. the scanner is not locked on any
channel), transmission occurs on the "Home" channel (i.e. the channel that was
active when the scan operation was initiated). After Home transmit and receive
activity ceases the radio resumes channel scanning after the hang time has expired.
(SCAN/D) momentarily.