Motorola 68000192001-A Посібник із швидкого старту - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Гарнітури Motorola 68000192001-A. Motorola 68000192001-A 6 сторінок. Motorola cell phone quick start guide

Друкувати сторінку

TEST AND USE

Your phone and headset are now paired and

ready to make and receive calls.

To make a call:

Place the headset over your ear.

On the phone, dial the number you want to

call and press SEND key on your phone.

If your phone and headset are successfully

paired, you will hear ringing on the headset.

After you have successfully paired your

phone and headset, you don't need to

repeat these steps. For daily use, ensure

that your headset is turned ON and that

your phone's Bluetooth feature is ON.

TROUBLESHOOTING

My headset will not enter pairing mode.

Make sure that any devices previously paired

with the headset are turned off. If the indicator

light is not steadily lit in blue, turn off both the

other device and headset, wait 10 seconds,

then turn headset back on. Wait for the indicator

light to become steadily lit in blue, indicating

the headset is now in pairing mode.

My phone doesn't find my headset.

Make sure the indicator light on your headset is

on (lit in blue) and steady when your phone is

searching for devices (see step 3).

My headset worked before but now it's not

working.

Make sure your phone is on and the Bluetooth

feature is turned on in your phone (see step 2).

If the Bluetooth feature was turned off or was

turned on only temporarily, you may need to

restart the Bluetooth feature (see step 2) and

pair your phone and headset again (see step 3).

Support.

If you need more help, contact us at

1-877-MOTOBLU or visit us at

www.motorola.com/Bluetoothsupport

USING YOUR H390

See

Features and

Functions Guide

on the reverse side

for information on

using your H390

Note: If desired, your headset can be restored to

original factory settings. This action will erase all pairing

information stored in your headset. Thus, you will need

to pair your phone and headset again (see step 3).

Note: To restore your headset to original factory

settings, press and hold both Volume buttons and the

Call button at the same time for 10 seconds.