Motorola H270 - Headset - Over-the-ear Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Гарнітури Motorola H270 - Headset - Over-the-ear. Motorola H270 - Headset - Over-the-ear 11 сторінок. Universal bluetooth headset
Також для Motorola H270 - Headset - Over-the-ear: Посібник користувача (13 сторінок), Посібник із швидкого старту (2 сторінок), Посібник із швидкого старту (41 сторінок)
![Motorola H270 - Headset - Over-the-ear Посібник із швидкого старту](/uploads/products/server2/6117215/6117215.jpg)
3
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Power on headset by sliding the Power switch
towards the microphone to initiate easy
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
headset is in pairing mode.
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
4
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
1
Place the headset over your ear.
2
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
YOU ARE DONE!
PAIR
Your Headset and Ph
Indicator Light
(steadily blue
for pairing)
Power Switch
hone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
1
On your Motorola phone, press
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
2
Select Motorola H270.
3
Select OK or Yes to pair your headset with
your phone.
4
Enter the passkey: 0000
5
Select OK.
When your headset successfully pairs and
connects with your phone, the indicator
light changes from steadily lit to flashing
blue and purple.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
NOTES ON SETUP
Note: If desired, your headset can be restored to
original factory settings. This action will erase all pairing
information stored in your headset. Thus, you will need
to pair your phone and headset again (see step 3).
Note: To restore your headset to original factory
settings, press and hold both Volume and Call buttons
at the same time and slide Power switch to ON.
M
Menu
>
(
)