Motorola Verizon moto g6 Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Гарнітури Motorola Verizon moto g6. Motorola Verizon moto g6 26 сторінок. Wireless bluetooth headset
Також для Motorola Verizon moto g6: Посібник користувача (32 сторінок), Інформаційний листок (15 сторінок), Посібник користувача (5 сторінок)
Друкувати сторінку
Fluid Inlet and Outlet Ports
NOTE: Remove and reverse the manifold(s) to
change the orientation of inlet or outlet port(s).
Follow Torque Instructions on page 16.
Aluminum (VA25A)
The fluid inlet and outlet manifolds each have
four 1 in. npt(f) or bspt threaded ports (F
M, N). Close off the unused ports, using the
supplied plugs.
Plastic
(VA25P, VA25C,
The fluid inlet and outlet manifolds each have a
1 in. raised face ANSI/DIN flange (F
in either a center or end location. Connect 1 in.
standard flanged plastic pipe to the pump.
See F
. 5.
IG
F
. 5. Flange connections (plastic pumps only, VA25P,
IG
12
859.0088
. 3,
IG
and VA25F)
. 4, M, N)
IG
Standard pipe flange kits are available in poly-
propylene (819.6885), stainless steel
(819.6886), and PVDF (819.6887). These kits
include:
the pipe flange
•
a PTFE gasket
•
four 1/2 in. bolts, spring lock washers,
•
flat washers and nuts.
Be sure to lubricate the threads of the bolts
and torque to 10-15 ft-lb (14-20 N•m). Follow
the bolt tightening sequence and do not
over-torque.
Stainless Steel (VA25S)
The fluid inlet and outlet manifolds each have
one 1 in. npt (f) or bspt threaded port.
ti14181ba
Torque to 10-15 ft-lb (14-20 N•m). Do
1
not over-torque.
VA25C,
Bolt tightening sequence
1
3
2
4
ti14182a
Key:
M
1 in. fluid inlet flange
N
1 in. fluid outlet flange
S
1 in. standard pipe flange
T
PTFE gasket
U
Flat washer
V
Nut
W
Lock washer
X
Bolt
and
VA25F
models)