Motorola CPEi 300 Series Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Модем Motorola CPEi 300 Series. Motorola CPEi 300 Series 2 сторінки.

Друкувати сторінку
Cable Connection Guide
Connect the cables in
numerical order as shown.
5
Computer
Procedure to Install the Unit
No computer software applications or drivers are required to complete installation.
Connect the power cord and power adapter together.
1
Plug the power adapter into the power connector on the back of the unit.
2
Plug the power cord into an AC outlet. The unit will turn on.
3
Plug one end of the Ethernet cable into the Ethernet connector on the back of the unit.
4
Plug the other end of the Ethernet cable into the Ethernet connector of your computer.
5
6
Plug one end of the phone line into an activated phone line connector on the back of the
*
unit. Phone line activation is dependent upon your service contract.
Plug the other end of the phone line into the phone line connector of your telephone.
7
*
At your computer, open your browser and enter http://mywimax. (with a dot at the end)
8
into the address field and press the Enter key. A wizard will start up to guide you through
the installation.
Follow the directions in the wizard to complete the installation. When using the wizard
9
for the first time, use the default value provided by the wizard as the password.
7
*
Phone
Phone Line
*Optional
Ethernet
Cable
12V
2A
L1
2
6
*
4
steps
AC Power
12V
2A
L1
L2
CPEi 300
L2
3
Power Cord
Adapter
1