Epson TM-H6000II Посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник для Виробник етикеток Epson TM-H6000II. Epson TM-H6000II 13 сторінок. How to connect printer with a wireless adapter
Також для Epson TM-H6000II: Брошура (2 сторінок), Брошура (2 сторінок), Посібник користувача (15 сторінок), Інструкція з експлуатації (12 сторінок)

Друкувати сторінку

How to connect an Epson POS printer with Ethernet Interface

Setting the IP Address using TMNet WinConfig

To use the UB-E02 with TCP/IP, you first need to set its IP address. You can set the IP address by using the EPSON

TMNet WinConfig or arp/ping command.

Running the TMNet WinNet configuration utility on the Computer

Once connected you can run the TMNet configuration utility to view or change the settings on the Ethernet card.

To obtain the TMNet configuration utility from Epson:

Setting the IP Address using EPSON TMNet WinConfig

1. Set the TCP/IP of your operating system.

2. Install the EPSON TMNet WinConfig.

3. Set the IP address using EPSON TMNet WinConfig.

The utility will scan for and should list the Ethernet printer.

http://www.beaglehardware.com/howtoethernet.html[3/4/2011 12:27:20 PM]

1. You may have to re-enable your wired LAN port to download the EpsonTMNetWinConfig utility.

2. Download and Install Epson's TMNetWinConfig available from

WILL be REQUIRED

3. You

4. If you do not have a log in, you will be required to register for this service (this is free and takes

less than 10 minutes). This is a process controlled by Epson not Beagle Hardware.

TECHNICAL RESOURCES

5. Click on

Ethernet INTERFACES

6. Select

download icon for the TMNetWinConfig

7. Click the

For detailed installation instructions, click here.

The 'Submit' button with write settings to the printer. The

Ethernet adapter is reset when you press the 'Reset' button.

(Type IV)

to log in to access these drivers.

CONNECT-IT INTERFACES

under the

www.epsonexpert.com

Printer

Sale!

TM-U220

$129

TM-U295

$184

TM-U375

$199

TM-

U675