Epson TM-T88IV ReStick Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Виробник етикеток Epson TM-T88IV ReStick. Epson TM-T88IV ReStick 20 сторінок. Receipt restick printer in windows using an ethernet connection
Також для Epson TM-T88IV ReStick: Брошура (2 сторінок), Технічні характеристики (2 сторінок), Посібник користувача (15 сторінок), Посібник користувача (9 сторінок), Технічна примітка (8 сторінок), Покрокове керівництво по встановленню (14 сторінок), Технічний бюлетень (5 сторінок), Посібник (10 сторінок)

Epson TM-T88IV ReStick Посібник користувача
*1
Character size
Character structure
Number of characters
Printing speed
Paper feed speed
Line spacing (default)
Roll Paper (single-ply)
Thermal paper type
Interface
(compatible)
Receive buffer
Cash drawer function
*2
Supply voltage
Current consumption
Temperature
Humidity
Overall dimensions
Weight (mass)
lps: lines per second
dpi: dots per 25.4 mm (dots per inch)
*1: The values in the brackets are for Thai characters, and can be selected by control commands.
*2: Be sure to use a safety-standards-applied power source that meets the following specifications.
Rated output: 24 V/2.0 to 10.0 A
Maximum output: 240 VA or less
6 TM-T88IV User's Manual
Font A and Special Font A:
1.41 × 3.38 (1.41 × 10.15)/1.41 × 6.76(1.41 × 20.30)/2.82 × 3.38 (2.82 × 10.15)
/2.82 × 6.76 (2.82 × 20.30) mm
Font B: 0.99 × 2.40 (0.99 × 7.19)/0.99 × 4.80 (0.99 × 14.38)
/1.98 × 2.40 (1.98 × 7.19)/1.98 × 4.80 (1.98 × 14.38) mm
Special Font B: 0.99 × 3.38 (0.99 × 10.15)/0.99 × 6.76 (0.99 × 20.30)
/1.98 × 3.38 (1.98 × 10.15)/1.98 × 6.76 (1.98 × 20.30) mm
Font A (default): 12 × 24; Font B: 9 × 17
Special Font A: 12 × 24; Special Font B: 9 × 24
Alphanumeric characters: 95; International characters: 1
Extended graphics: 128 × 1 table
Thai characters: 128 × 3 pages (133 character types)/
Vietnam characters: 128 × 2 pages (135 character types)
High-speed mode:
200 mm/s max.; 47.2 lps (4.23 mm feed)
Ladder bar code and 2D code: 100mm/s
Low-power consumption mode:
150 mm/s max.; 35.5 lps (4.23 mm feed)
Bit image, Ladder bar code, 2D code and Page mode: 60mm/s
The above speed values are approximate.
The values are when the printer prints with density "Normal" at 24 V and 25°C
Speed is adjusted automatically depending on the voltage applied and head
temperature.
Approx. 200 mm/s continuous paper feed
4.23 mm
Size: 80 mm paper width model: 79.5 mm ± 0.5 mm,
Maximum outside diameter:
Roll Paper spool diameter:
Specified:
NTP080-80
Serial (RS-232)/Parallel (IEEE1284)/
USB [compliance: USB 2.0, communication speed: Full-Speed(12Mbps)]
4KB/45 bytes
2 drives
DC + 24 V ± 7%
High-speed mode:
Low-power consumption mode: 1.1 A
Operating:
5 to 45°C
Storage:
–10 to 50°C, except for paper
Operating:
10 to 90% RH
Storage:
10 to 90% RH, except for paper
148 × 145 × 195 mm (H × W × D)
Approx. 1.8 kg
83 mm
Inside: 12 mm; Outside: 18 mm
1.8 A