Epson TM-T88V Посібник користувача - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник користувача для Виробник етикеток Epson TM-T88V. Epson TM-T88V 19 сторінок. Pos printer
Також для Epson TM-T88V: Технічні характеристики (8 сторінок), Брошура та технічні характеристики (8 сторінок), Технічні характеристики (2 сторінок), Інструкція з налаштування (2 сторінок), Посібник (10 сторінок), Посібник (4 сторінок)
Друкувати сторінку
When using USB/Ethernet/Wireless LAN Interface
DIP Switch Bank 1
SW
Function
1-1
Auto line feed
1-2
Receive buffer
capacity
1-3~
*1
1-8
*1: When using the USB interface on a model with a serial
or parallel interface, the function of DIP switch 1-8 is as
follows.
SW
Function
1-8
Power saving function
for USB
Specifications
Printing method
Dot density
Printing direction
Printing width
Characters per line
(default)
Character spacing
(default)
Character size
Character structure
Number of characters Alphanumeric characters: 95; International character sets: 18 sets
Printing speed
ON
OFF
Always
Always disabled
enabled
45 bytes
4KB
Undefined
ON
OFF
Disabled
Enabled
80 mm paper width
Thermal line printing
180 dpi ×180 dpi [dots per 25.4 mm {1"}]
Unidirectional with friction feed
72 mm {2.83"}, 512 dot positions
Font A: 42; Font B: 56
Font A: 0.28 mm {.01"} (2 dots), Font B: 0.28 mm {.01"} (2 dots)
Standard/Double-height/Double-width/Double-width and Double-height
Font A: 1.41 × 3.39/1.41 × 6.77/2.82 × 3.39/2.82 × 6.77 mm
Font B: 0.99 × 2.40/0.99 × 4.80/1.98 × 2.40/1.98 × 4.80 mm
Font A (default): 12 × 24; Font B: 9 × 17 (including 2-dot horizontal spacing)
Extended graphics: 128 × 43 pages (including user-defined page)
300 mm/s {11.8"/s} max.; 70.9 lps (4.23 mm {1/6"} feed)
Ladder bar code and 2D code: 100 mm/s {2.4"/s}
The above speed values are approximate.
The values are when the printer prints with density "Normal" at 24 V and 25°C {77°F}
Speed is adjusted automatically depending on the voltage applied and head
temperature.
DIP Switch Bank 2
SW
Function
2-1
Handshaking
(BUSY condition)
2-2
Do not change
settings
2-3
Print density
2-4
2-5
Release condition of
receive buffer BUSY
(If receive buffer
capacity set to 4KB.)
2-6
Do not change
2-7
setting.
2-8
Do not change
setting.
*2: Whether DIP switch 2-8 is set to ON or OFF is
dependent on the printer model.
Table B
Print density/low power
Print density "Normal"
Print density "Medium"
Print density "Dark"
Do not set
58 mm paper width
50.8 mm {2.0"}, 360 dot positions
Font A: 30; Font B: 40
TM-T88V User's Manual 17
English
ON
OFF
Receive buffer
Offline or
full
Receive buffer
full
Fixed to OFF
See Table B
Releases BUSY
Releases BUSY
when remaining
when remaining
receive buffer
receive buffer
capacity
capacity
reaches
reaches
138 bytes.
256 bytes.
Fixed to OFF
*
2
SW2-3
SW2-4
OFF
ON
OFF
ON
*1
OFF
OFF
ON
ON