Epson 00000650 - Perfection 3200 PRO Color Scanner Посібник з програмного забезпечення - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з програмного забезпечення для Програмне забезпечення Epson 00000650 - Perfection 3200 PRO Color Scanner. Epson 00000650 - Perfection 3200 PRO Color Scanner 34 сторінки. Epson scan icm updater v1.20 (psb.2008.07.001)
Також для Epson 00000650 - Perfection 3200 PRO Color Scanner: Брошура та технічні характеристики (4 сторінок), Посібник з експлуатації (8 сторінок), Бюлетень підтримки продукту (23 сторінок), Посібник (11 сторінок), Прочитайте це спочатку (2 сторінок), Оновлення (1 сторінок)

Scanning the Targets with SilverFast

To build profiles, you must use special settings in

SilverFast that are quite different from the ones

used in normal scanning. You must scan the

profiling target with all color management and

color correction features turned off, following the

instructions in this section.

Launch the standalone SilverFast

application. You'll be prompted to import

the SilverFast (Epson) plug-in, as shown.

You can find the plug-in inside the

SilverFast application folder.

Note: Your scanner must be connected to

your computer and turned on before you can

successfully import the scanner plug-in.

Next, you'll be prompted to enter your

name, company, and serial number

information. You'll find the SilverFast serial

number on the back of the SilverFast

package. Once you enter this information

and click OK, SilverFast opens.

Before you scan the target, you need to

make sure that SilverFast is configured

correctly for the profile scan.

On the main SilverFast screen, click the

General tab, and make sure the Scan Mode

is set to Normal (File), Original is set to

Reflective, and Pos./Neg. is set to Positive,

as shown:

Once you've confirmed the settings, click

the Options button. The SilverFast Defaults

screen appears:

For Gamma-Gradation, enter 1.80. Check

for HDR output, then click the CMS tab.