Epson 2090 - LQ B/W Dot-matrix Printer Посібник користувача - Сторінка 25
Переглянути онлайн або завантажити pdf Посібник користувача для Програмне забезпечення Epson 2090 - LQ B/W Dot-matrix Printer. Epson 2090 - LQ B/W Dot-matrix Printer 48 сторінок. Epson lq-2090: product brochure
Також для Epson 2090 - LQ B/W Dot-matrix Printer: Посібник (11 сторінок), Технічна довідка (7 сторінок), Технічні характеристики (2 сторінок)
Друкувати сторінку
10. If you load paper in the
front slot, reattach the front
cover.
If you have the LQ-2090,
remove the sub cover from
the front cover before
replacing the front cover. Be
sure to reattach the sub cover
when you want to print from
a different paper source.
11. Turn on the printer.
12. Remove any slack in the paper by pressing the LF/FF button.
When the printer receives data, it will start printing at the current
position without advancing the paper. If necessary, adjust the top of
form position using the Micro Adjust function (see page 33).
Caution:
c
Never use the knob to adjust the top-of-form position; this may
damage the printer or cause it to lose the top-of-form position.
13. Attach the printer cover by inserting the front tabs into the slots,
then lowering the cover into place. Close the paper guide cover.
14. Send a print job to the
printer. The printer starts
printing from the
top-of-form position.
After you finish printing,
open the paper guide
cover and tear off the
printed document at the
perforation nearest the
paper exit slot.
Paper Handling
25