Epson 3170 - Perfection Photo Посібник користувача - Сторінка 5

Друкувати сторінку

Epson 3170 - Perfection Photo Посібник користувача

EPSON Scan

Color Restoration is available in Home and Professional Modes.

1. To select Color Restoration, start EPSON Scan. You see a

screen similar to this.

Click Color

Restoration

2. Click the

button at the bottom of the screen.

Preview

3. Select the

Color Restoration

Professional Mode, you may need to scroll to the bottom of

the screen.)

Scanning Film and Transparencies

The scanner cover has a built-in transparency unit (film

adapter). To scan film or negative strips, slides, or

transparencies, you need to remove the document mat from the

scanner cover and insert the film in a holder.

The scanner comes with 3 different film holders: one for 35 mm

film or negative strips, one for 35 mm slides, and one for

medium-format (120/220) transparencies.

1. Make sure the film adapter cable is connected to

the scanner (see the Start Here sheet for instructions).

If you need to connect the cable, first turn the

scanner off. Then turn it back on again after

you connect the cable.

2. Lift the scanner cover all the way up and slide

the reflective document mat up and off of the

scanner cover.

checkbox. (If you're using

3. Follow the instructions for the type of film you are

scanning:

If you are scanning 35 mm film or negative strips or

medium-format (120/220) transparencies, slide the film

into the corresponding holder, with the film's shiny side

facing down.

Medium-format

transparencies: Slide the

film into the holder as

shown. Then lower the

cover and press the tab to

lock it in place.

Place the film holder on the scanner as shown. Make sure

the white triangle on the holder points to the upper-right

corner of the scanner.

8/03

EPSON Perfection 3170

35 mm film or negative strips

Cover tab

Make sure this

calibration space

is uncovered

EPSON Perfection 3170 - 5