Philips 14PV284/05 Інструкція з експлуатації Посібник з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для ТЕЛЕБАЧЕННЯ Philips 14PV284/05. Philips 14PV284/05 12 сторінок. Philips remote control operating instructions in brief
Також для Philips 14PV284/05: Інструкція з експлуатації Посібник з експлуатації (16 сторінок)
Друкувати сторінку
&
Programming with 'VIDEOPlus+'
All the information required for programming is encoded in the 'VIDEOPlus+' code.
SV/V+
1
Press the
button on the remote control.
2
Enter the entire 'VIDEOPlus+ code'. This code (up to 9 digits) is found next to the start time of a
TV programme in your TV guide.
If you entered an incorrect code number, clear it with the
3
If you want to repeat programming at daily or weekly intervals, select the required settings in
the 'DAILY/WEEKLY' line.
'Daily' programming can only be used for recordings to be made from Mondays to Fridays
inclusive.
4
After confirming the corresponding data appears on the TV screen.
Note: If you use VIDEOPlus+ for the first time, the 'PROGRAMME NR.' line appears when you
enter the VIDEOPlus+ code. Enter the required programme number.
5
OK
Confirm with the
button.
The data has been stored in a TIMER block.
Please ensure that you loaded a cassette without erase protection.
STANDBY m
6
Press the
button.
How to enter, check or clear a TIMER-block manually
TIMER k
1
Press the
button.
2
Select a free TIMER block or the TIMER block you want to check or clear.
CLEAR
3
Clear: Press the
button.
D
C
4
Enter/Check: Press the
or
button to switch between 'DATE' (date), 'DW' (daily, weekly),
'PR' (programme number), 'START' (start time) and 'END' (end time).
A
B
Press the
and the
or the
MENU
5
To end programming, press the
STANDBY m
6
Press the
button.
CLEAR
button.
0-9
buttons to change the data.
button.
Selecting a TV channel
Select the required TV channel (= programme number) with the
tons on the remote control.
The selected programme number (e.g.: 'P 01' ) appears in the upper right corner of the TV screen.
Volume control
Sp
You can control the volume level with the
If you want to mute the sound temporarily (e.g.: during a telephone call), press the
ton on the remote control. When you press it again, the sound returns at the same volume level.
Picture control
You can control brightness, contrast, sharpness and colour here.
MENU
1
Press the
button.
2
Select and confirm the line 'PICTURE' .
3
Select and confirm the TV screen setting.
Note: In addition, you can adjust the tint for the playback of cassettes in the NTSC standard.
P p
0-9
button or the
but-
button.
MUTE y
but-