Philips 15PF7835 Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для ТЕЛЕБАЧЕННЯ Philips 15PF7835. Philips 15PF7835 2 сторінки. Flat television | hd series
Також для Philips 15PF7835: Технічні характеристики (2 сторінок), Посібник з швидкого використання та підключення (4 сторінок), Технічні характеристики (2 сторінок), Технічні характеристики (2 сторінок), Технічні характеристики (2 сторінок)
Друкувати сторінку
18
U
LCD TV P
/S
M
19
SING THE
ICTURE
OUND
ENU
The picture and sound menus allow you to make adjustments to the picture and sound. It also
A
CTIVATING THE
allow you to select and activate other features in the menu.
The Timer feature allows you to set the timer to switch to another channel at a specified time
1. Press the
(MENU) button to enter main menu.
while you are watching another channel or when the TV is on standby mode. Note : For the timer
MENU
to function, the set must not be switched off. 30 seconds before the timer is activated, a message
2. Use the
(CURSOR UP/DOWN) buttons to select the items on the
indicating the time left for the channel switch will appear on the screen. To disable the channel switch,
PICTURE/SOUND menu.
press any button on the remote control. Once the set is switched off, the timer is disabled.
3. Use the
(CURSOR LEFT/RIGHT) buttons to access the sub-menus.
Press Button
/
Picture
Activities
PICTURE
MENU
menu items
▲
Ñ
BRIGHTNESS
É
38
•
Brightness
Increase or decrease brightness level.
COLOUR
•
CONTRAST
•
SHARPNESS
Colour
Increase or decrease color level.
•
NR
•
Contrast
Increase or decrease contrast level until
PICTURE
lightest parts of the picture show good
Use the Menu and Cursor Up, Down, Right and Left buttons to access the Timer menu and
•
detail.
COLOUR
•
CONTRAST
select the items. make the following adjustments or activate the timer.
•
SHARPNESS
Sharpness
Increase or decrease sharpness level to
•
NR
COLOUR
improve detail in the picture.
Ñ
CONTRAST +
•
ON
TIME
É
•
NR
Select "ON" to reduce "noisy" picture
(Noise
(little dots on picture) due to weak signal.
Reduction)
Note : HUE feature is only
applicable to NTSC
START TIME : Use the
Contrast +
Select "ON" to allow you to optimise the
programmes. The HUE item
total contrast for improved picture quality.
will not appear on the menu if
programme is in PAL mode.
Sound
Activities
SOUND
STOP TIME : Use the
•
▲
menu items
É
EQUALIZER
120HZ
▼
•
BALANCE
500HZ
•
Equalizer
Allows you a choice of different sound
AVL
1500HZ
•
frequencies.
INCR.SURROUND
5KHZ
•
10KHZ
CHANNEL
BALANCE
Increase or decrease to adjust balance
level.
AVL
As variation in signal conditions can result
(Auto Volume
in a sudden change in volume during
Leveller)
commercial breaks or channel switching,
ACTIVATE
selecting the "ON" function will enable
the volume to remain at a standard
volume level.
Incredible
Allows you to select between Stereo,
Surround
and Incredible Surround sound when
DISPLAY
transmission is in stereo.
Allows you to select between Spatial and
Mono sound when transmission is in
mono.
24
A
LCD TV S
P
/S
C
25
CTIVATING THE
MART
ICTURES
OUND
OBTROLS
If a TV channel broadcast contains teletext information, each channel that broadcasts teletext
SMART PICTURE feature offers you a choice of 5 picture settings, namely, RICH,
transmits a page (index page) with information on how to use the teletext system, usually on
NATURAL, SOFT, PERSONAL and MULTIMEDIA.
page 100. The system transmitted is indicated in the option line at the bottom of the screen.
A
LCD TV S
P
/S
C
CTIVATING THE
MART
ICTURE
OUND
ONTROL
SMART SOUND feature offers you a choice of 4 sound settings, namely, THEATRE,
MUSIC, VOICE and PERSONAL.
SMART
SMART
Press
(SMART PICTURE) or
(SMART SOUND) button repeatedly to cycle
through the settings to select your desired mode.
PERSONAL
Definition of Picture Settings
BRIGHTNESS
48
&
COLOR
41
PERSONAL
: Picture settings are set to your
PICTURE
RICH
81
preference.
SHARPNESS
3
BRIGHTNESS
42
RICH
: Emphasize very vibrant colours.
COLOR
30
(Suitable for AV mode in
PICTURE
50
NATURAL
brightly-lit room)
SHARPNESS
3
BRIGHTNESS
43
NATURAL
: Emphasize original colours.
COLOR
30
SOFT
: Emphasize "warm" colours.
PICTURE
75
V
SOFT
(Suitable for dimly-lit room
SHARPNESS
3
BRIGHTNESS
43
condition and gives cinema-like
COLOR
27
PICTURE
79
effect when light is switched off).
MULTIMEDIA
SHARPNESS
3
MULTIMEDIA : Emphasize "soft" colours. (Suitable
BRIGHTNESS
45
for playing computer games,
COLOR
30
surfing, etc.)
PICTURE
71
SHARPNESS
3
Note
• The PERSONAL setting is the setting that you set up
using the Picture menu in the main menu. This is the
only setting in the Smart Picture settings that can be
changed. All the other settings are pre-set at the factory.
• The values shown in the Picture/Sound Setting diagrams
are sample values only. Your television's values may
vary and display different numbers.
PERSONAL
120HZ
20
500HZ
6
Definition of Sound Settings
1500HZ
6
VOICE
PERSONAL : Sound settings are set to your
120HZ
5KHZ
5
9
10KHZ
15
500HZ
5
preference.
1500HZ
MUSIC
6
VOICE
: Emphasize high tone. (Treble boosted)
120HZ
20
5KHZ
5
500HZ
10KHZ
3
6
MUSIC
: Emphasize low tone. (Bass boosted)
1500HZ
THEATRE
6
THEATRE
: Emphasize sensation to action.
120HZ
26
5KHZ
9
(Bass and Treble boosted)
10KHZ
500HZ
6
15
1500HZ
6
Note : The values shown in the Picture/Sound
5KHZ
17
Setting diagrams are sample values only. Your
10KHZ
19
television's values may vary and display different
numbers.
30
31
A
FM R
F
M
CCESSING THE
ADIO
EATURES
ENU
Below is a list of frequently occurring problems. Before you call for service, try these simple checks.
U
SING THE
M
ODE
S
ELECT
Some of these problems can easily be rectified if you know what to do.
This feature allows you to go into TV mode. Note : Ensure you are in FM RADIO mode
Symptom
before you access FM RADIO main menu.
No power
MENU
k
k
MENU
MENU
k
FEATURES
▲
•
É
TIMER
TIME
▼
•
MODE SELECT
START TIME
•
SCREENSAVER
STOP TIME
No picture
CHANNEL
ACTIVATE
1. Enter FM RADIO main menu.
2. Select FEATURES.
3. Enter FEATURES menu.
Good picture
but no sound
Press Button
Result on Screen
4. Select MODE SELECT.
Good sound but poor
colour or no picture
FEATURES
•
TIMER
TV
Snowish picture and
Ñ
MODE SELECT
•
noise
SCREENSAVER
5. Enter MODE SELECT menu.
Horizontal dotted lines
FEATURES
MODE SELECT
▲
•
Ñ
TV
É
6. Enter selected mode.
Double images or
"Ghost" images
TV not responding to
RADIO/TV
Note : You can also access directly the TV mode by the
button.
remote control handset
A
S
CTIVATING THE
CREENSAVER
An after-image appears
FEATURES
Repeat Steps 1 to 3 as in "Using the Mode Select".
•
TIMER
•
MODE SELECT
An after-image remains
4. Select SCREENSAVER.
SCREENSAVER
ON
Ñ
after the power has been
turned off
FEATURES
or
5. Select ON option to activate
▲
•
TIMER
Cannot access FM radio
the screensaver mode.
•
MODE SELECT
•
•
SCREENSAVER
É
ON
6. Exit menu from screen.
i
▼
A
LCD TV F
M
20
A
CCESSING THE
EATURES
ENU
CCESSING THE
T
IMER
U
SING THE
M
ODE
S
ELECT
This feature allows you to switch from TV mode to FM RADIO mode.
Press Button
/
Result on TV Screen
MENU
1. Enter into main menu and select
FEATURES.
1. Enter into main menu and select
FEATURES
TIMER
FEATURES.
▲
2. Enter FEATURES menu.
•
Ñ
TIME
É
--:--
2. Enter FEATURES menu.
•
START TIME
•
STOP TIME
3. Enter TIMER menu.
•
CHANNEL.
3. Select MODE SELECT.
•
ACTIVATE
4. Enter MODE SELECT menu.
1
2
3
4
5
6
: Use the
buttons to key in the current time to
FEATURES
7
8
9
0
TIMER
5. Enter FM RADIO mode.
enable functioning of the timer feature. After keying
▲
Ñ
TIME
•
É
12:30
in the time, exit TIME mode by the MENU button.
•
START TIME
▼
Note : You can also access directly the FM RADIO mode
•
1
2
3
STOP TIME
FEATURES
4
5
6
•
7
8
9
buttons to key in the time you want the
CHANNEL.
RADIO/TV
TIMER
by the
button.
0
•
ACTIVATE
channel to be switched on. After keying in the time,
TIME
▲
Ñ
•
•
exit START TIME mode by the MENU button.
START TIME
É
13:30
•
STOP TIME
▼
•
A
C
CHANNEL
CTIVATING THE
HILD
FEATURES
•
1
2
3
TIMER
ACTIVATE
4
5
6
7
8
9
buttons to key in the time you want
•
TIME
The Child Lock feature allows you to lock channels on your TV Top Controls to prevent your children
0
the program to be switched off. After keying in the
•
START TIME
▲
from watching programmes you deem undesirable. Note : You cannot have access to the locked
Ñ
STOP TIME
•
15:30
time, exit STOP TIME mode by the MENU button.
É
channels via the top controls of the TV set once the channels are locked. You can only have access to
•
CHANNEL
▼
FEATURES
•
ACTIVATE
the locked channels via the remote control. Keep the remote control out of reach so as to prevent
TIMER
1
2
3
/
•
▲
: Use the
buttons to key in the
TIME
your children from having access to it.
4
5
6
7
8
9
•
START
TIMEE
0
•
STOP TIME
Press Button
channel number.
CHANNEL
•
É
8
Ñ
•
ACTIVATE
FEATURES
▼
▼
MENU
TIMER
1. Enter into main menu.
•
TIME
▲
: Use the Cursor buttons to select between the
•
START
TIMEE
2. Select FEATURES.
•
STOP TIME
ONCE and DAILY mode to activate the timer.
•
CHANNEL
Ñ
ACTIVATE
•
ONCE
É
FEATURES
3. Enter FEATURES menu.
TIMER
▲
•
: Use the Cursor buttons to select the ON option
START
TIMEE
•
STOP
TIMEE
4. Select CHILD LOCK.
•
to display current time on screen
.
CHANNEL
•
ACTIVATE
•
DISPLAY
ON
Ñ
É
26
U
T
F
SING THE
ELETEXT
2
A/CH
q
X
& On/Off teletext
Press the button once to
(
b
g
and Superimpose
switch on teletext display.
SMART
RADIO/TV
SMART
teletext page
(A channel in which teletext
2
over TV
is being transmitted must be
q
X
A/CH
'
MENU
k
programme
selected).
Press the button the second
b
g
SMART
RADIO/TV
SMART
time to superimpose the
MUTE
teletext page over the TV
¬
V
b
CH
k
MENU
programme.
Press the button the third time
2
3
1
to exit teletext mode.
"
4
5
6
MUTE
¬
7
8
9
CH
é Selecting a
Key in the required teletext
i
0
teletext page
page (3 digits). The page
AV
é
1
2
3
number is displayed at the top
4
5
6
left hand corner of the screen.
1
2
3
7
8
9
When the teletext page is
4
5
6
7
8
9
located, the counter stops
i
0
0
AV
searching. If the counter keeps
searching, it means that the
page is not available for
selection. If you make a
How to select your favourite page
mistake in keying the page
number, you have to complete
This feature allows you select 4 of your favourite or most commonly viewed page and stored
them in the favourite page selection. You can then access directly your favourite page by the
keying the 3-digit number
colour buttons without having to key in the page number.
before re-keying the correct
1. Press the
(Teletext On/Off) button to enter teletext mode.
page number.
b
" Accessing
2. Press the
(Menu) button to enter favourite page selection. Note : An alphabet "F"
Press the CHANNEL +
MENU
appears at the left hand bottom corner followed by the colour page numbers indicating that
teletext page
button to display the next page
it is in favourite page mode.
and the CHANNEL – button
to display the previous page.
CH
3. Key in your favourite page by the
4. Press the
(OSD) button followed by your desired colour button to store your
i
' Direct Access to
The 4-colour buttons allow
favourite page.
an item or
you to access directly an item
5. Repeat step 3 to 4 to select and store other favourite pages.
corresponding
or corresponding pages.
pages
6. To exit Favourite page mode, press
A/CH
q
X
7. Press the
b
(Teletext On/Off) button twice to exit teletext mode.
32
B
C
S
EFORE
ALLING
ERVICE
What you should do
• Check whether adaptor is connected properly into socket.
Screen size
• Check whether the TV's AC power cord is plugged into the mains
socket. If there is still no power, disconnect the plug. Wait for 60
Audio Output
seconds and re-insert plug. Switch on the TV again.
RADIO/TV
TV System
• Check whether transmission is in TV mode. Press
(RADIO/TV)
button on remote control to confirm.
• Check the antenna connection at the bottom of the TV.
• Possible TV station problem. Try another channel.
• Try increasing the volume.
• Check whether the sound is muted. If it is, press the Mute button
on the remote control to restore sound.
• Check whether your headphone is not connected.
Playback System
• Try increasing the contrast and brightness setting.
Set Dimensions
Length
• Check the antenna connection at the bottom of the TV.
Height
Depth
• Possible electrical interference e.g. from hairdryer, vacuum cleaner,
etc. Switch off appliances.
Net Weight of Set with stand (approximate)
• Possible poor positioning of antenna. Using a highly directional
antenna may improve reception.
Note
• Check life span of batteries of remote control handset.
• Aim remote control handset directly at remote control sensor lens
For Operating Voltage, Frequency, Power Consumption and Version Number, refer to the
on the TV.
type number on mains adaptor.
• If an image remains on the screen for an extended period of time, it
may be imprinted on the screen and will leave an after-image. This
usually disappears after a few hours.
• This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal. This after-image
will disappear after a set amount of time.
• Check whether the FM Antenna socket is connected to the FM
radio mains properly.
LCD TV F
M
21
A
LCD TV F
EATURES
ENU
CCESSING THE
....... A
C
L
CTIVATING THE
HILD
OCK
Press Button
5. Enter ACCESS CODE mode.
Result on TV Screen
1
2
3
4
5
6
6. Key in access code 0711
7
8
9
0
FEATURES
(0711 is the default access code).
▲
•
TIMER
TIME
É
A message INCORRECT will appear.
▼
•
MODE SELECT
START TIME
•
CHILD LOCK
STOP TIME
•
1
2
3
CHANNEL
4
5
6
7. Key in 0711 the second time.
7
8
9
ACTIVATE
0
When the message CORRECT
FEATURES
•
appears, the CHILD LOCK
TIMER
•
Ñ
MODE SELECT
É
FM RADIO
menu is now accessible.
•
CHILD LOCK
•
FEATURES
You can now proceed to change
MODE SELECT
▲
the access code of your choice.
Ñ
FM RADIO
•
É
A
CTIVATING THE
C
HILD
L
OCK
(C
HANGE
Press Button
8. Select CHANGE CODE.
L
(A
C
)
OCK
CCESS
ODE
9. Enter CHANGE CODE mode.
1
2
3
10. Key in the access code of your
4
5
6
7
8
9
0
choice.
Result on TV Screen
1
2
3
4
5
6
11. Confirm access code.
7
8
9
FEATURES
0
•
▲
É
TIMER
TIME
▼
•
MODE SELECT
START TIME
•
CHILD LOCK
STOP TIME
When the new code is confirmed,
•
CHANNEL
ACTIVATE
the message CORRECT will
FEATURES
appear.
•
TIMER
ACCESS CODE
•
MODE SELECT
– – – –
▲
12. Exit menu from screen.
•
CHILD LOCK
i
É
▼
•
Note : After you have exit menu from screen and you want to enter child lock menu again, you need
to key the new access code only once. If you have forgotten the new access code, key in 0711 twice
to enter the child lock menu. Upon entering the child lock menu, you can proceed to change code
again.
27
R
C
A
FM R
UNCTIONS OF
EMOTE
ONTROL
CCESSING THE
This TV also provides you with the FM RADIO for your listening pleasure. To enable you to access
( Hold
A selected page sometimes
the FM RADIO mode, you must connect the cable from FM Antenna socket to the FM Radio mains.
contains a few sub-pages. The
sub-page will automatically
g
Press Button
move to the next sub-page
after about 20 seconds. The
§
total number of sub-pages are
RADIO/TV
indicated at the top right
1. Enter into FM Radio mode.
hand corner of the screen.
Press the button once to hold
2. Enter FM RADIO main menu.
page and the second time to
MENU
release holding of page.
3. Press button repeatedly until INSTALL
§ Reveal/
Press the button once to reveal
is highlighted.
Conceal
hidden information (solutions
to puzzles, riddles, etc). Press
the button the second time to
conceal information. This
button is applicable only to
4. Enter INSTALL menu.
teletext page with puzzles,
riddles, etc.)
or
5. Press button repeatedly to scroll through the
available FM Mode On-screen options. These
options include LANGUAGE, AUTO STORE,
MANUAL STORE, SORT and NAME.
Use the Cursor Up, Down, Right and
Left buttons to access these options and
make your desired selection or adjustments.
LANGUAGE – Choose to view the
On-screen menu in your desired language.
AUTO STORE – Allows you to search
the FM antenna signal and store any FM
channel it finds in the TV's memory.
MANUAL STORE – Allows you to
manually tune any available FM signals.
SORT– Allows you to rearrange your stored
FM stations in the order you prefer.
1
2
3
4
5
6
(Digit 0 -9) buttons.
NAME – Allows you to apply a name to your
7
8
9
0
programmed FM radio stations. Add your own
personal name or choose one from the
predefined list.
6. Adjust or select items within the highlighted
(Menu) button.
MENU
feature sub-menu.
i
7. Exit menu from screen.
S
PECIFICATIONS
15PF7835
20PF7835
390 mm
510 mm
2 X 3 W
2 x 5 W
NTSC M
PAL B/G
PAL D/K
PAL I
SECAM B/G
SECAM D/K
SECAM K1
NTSC 3.58, NTSC 4.43, PAL 60
377 mm
477 mm
130 mm
141 mm
361 mm
435 mm
4.7 kg
7.8 kg
M
22
A
LCD TV F
EATURES
ENU
CCESSING THE
EATURES
(A
C
)
CCESS
ODE
A
CTIVATING THE
C
HILD
L
OCK
(L
OCK
C
HANNEL
Result on TV Screen
Repeat steps 1 to 6 as in "Activating the Child Lock (Access Code) on page 20 and page 21.
FEATURES
7. Enter LOCK CHANNEL mode.
•
TIMER
ACCESS CODE
•
MODE SELECT
X X X X
Ñ
CHILD LOCK
INCORRECT
•
or
8. Select the channel you want to block.
FEATURES
•
TIMER
ACCESS CODE
9. Activate blocking of channel. A keylock
•
MODE SELECT
X X X X
CHILD LOCK
CORRECT
symbol will appear beside the channel
Ñ
•
number indicating that it is locked.
FEATURES
▲
CHILD LOCK
i
10. Exit menu from screen.
•
Ñ
LOCK CHANNEL
É
2
•
CHANGE CODE
3
•
CLEAR ALL
4
Note : You cannot have access to the locked channels via the top controls of the TV set. You can only
5
have access to the locked channels via the remote control. When AV1 source is locked, CV1 source is
6
automatically locked. Like-wise, if CV1 source is locked, AV1 source is also automatically locked as
they share the same audio input. If you attempt to enter the INSTALL menu after locking a channel,
a message "Enter ACCESS CODE" will appear on the screen. You need to enter the ACCESS
C
ODE
)
CODE to enable you to enter the INSTALL menu.
Result on TV Screen
A
CTIVATING THE
C
HILD
L
OCK
(C
LEAR
A
LL
)
To unlock channels that you have locked, enter the Child Lock menu and activate the
FEATURES
CLEAR ALL mode.
CHILD LOCK
•
LOCK CHANNEL
ENTER
Repeat steps 1 to 6 as in "Activating the Child Lock (Access Code) on page 20 and page 21.
Ñ
CHANGE CODE
NEW CODE
•
CLEAR ALL
x x x x
7. Press button repeatedly until
CLEAR ALL is selected.
FEATURES
CHILD LOCK
•
LOCK CHANNEL
CONFIRM
Ñ
CHANGE CODE
CODE
•
CLEAR ALL
x x x x
8. Activate clearing of all locked
FEATURES
channels.
CHILD LOCK
•
LOCK CHANNEL
CONFIRM
Ñ
CHANGE CODE
CODE
•
9. Exit menu from screen.
CLEAR ALL
x x x x
i
CORRECT
Note
You can also unlock individual channel by the LOCK CHANNEL menu
• Repeat step 1 to 7 as in "Activating the Child Lock (Lock Channel)".
• Select the channel you want to unlock by the
or
buttons.
• Press the
button to unlock channel (the keylock symbol will disappear).
28
I
M
U
FM R
S
ADIO
NSTALLATION
ENU
SING THE
ADIO
OUND
The Sound menu allows you to make adjustments to the sound.
Note: Ensure you are in FM RADIO mode before you access FM RADIO main menu.
Result on TV Screen
MENU
k
MENU
k
Ñ
•
É
SOUND
EQUALIZER
▼
•
FEATURES
BALANCE
•
INSTALL
AVL
INCR.SURROUND
1. Press
button to enter FM RADIO
2. Press
button to enter the SOUND
MENU
•
SOUND
LANGUAGE
main menu. SOUND option is highlighted.
menu.
•
FEATURES
AUTO STORE
▲
•
INSTALL
MANUAL STORE
É
SORT
3. In the SOUND menu, press
or
button to adjust level or select desired setting.
NAME
4. Use the
buttons to select the various SOUND menu items and
▲
make your desired adjustments and access the sub-menus.
INSTALL
Ñ
•
Ñ
LANGUAGE
É
ENGLISH
•
AUTO STORE
B.MELAYU
5. Press
i
button to exit menu from screen.
•
MANUAL STORE
•
SORT
•
NAME
Sound menu items
Activities
•
▼
EQUALIZER
Allows you a choice of different sound frequencies.
INSTALL
▲
•
LANGUAGE
BALANCE
Increase or decrease to adjust balance level.
•
Ñ
AUTO STORE
É
SEARCH
•
AVL
As variation in signal conditions can result a sudden change in
MANUAL STORE
•
SORT
(Auto Volume
volume during FM channel switching, selecting the "ON" function
•
NAME
Leveller)
will enable the volume to remain at a standard volume level.
•
▼
INCREDIBLE
Allows you to select between Incredible Surround or Stereo
INSTALL
SURROUND
sound when transmission is in stereo. Allows you to select
•
LANGUAGE
SEARCH
between Spatial and Mono sound when transmission is in mono.
•
AUTO STORE
CHANNEL
▲
•
MANUAL STORE
STORE
É
▼
•
SORT
•
NAME
U
FM R
S
S
SING THE
ADIO
MART
OUND
INSTALL
•
LANGUAGE
FROM
•
AUTO STORE
TO
FM RADIO SMART SOUND feature offers you a choice of 5 sound settings, namely,
•
MANUAL STORE
EXCHANGE
ROCK, POP, CLASSICAL, JAZZ, and PERSONAL.
•
▲
É
SORT
▼
•
NAME
RADIO/TV
1) Press the -
(FM RADIO) button to enter FM RADIO mode.
INSTALL
▲
•
LANGUAGE
2) Press
SMART
(SMART SOUND) button repeatedly to cycle through the various settings
•
AUTO STORE
•
MANUAL STORE
and select your desired sound mode.
•
SORT
•
Ñ
NAME
É
PERSONAL
3) Press the
(OSD) button to exit On-Screen display .
i
U
S
F
SING THE
CREEN
ORMAT
M
23
U
S
F
ENU
SING THE
CREEN
ORMAT
You can have a choice of different formats for your viewing pleasure, namely : - 4:3 mode,
)
EXPAND 4:3 mode and COMPRESS 16:9 mode.
q
Press the
(Format) button repeatedly to toggle the different screen formats and select
your desired Screen Format .
FEATURES
CHILD LOCK
LOCK CHANNEL
•
2
Ñ
É
When to use the Screen Formats
•
CHANGE CODE
3
•
CLEAR ALL
4
4:3 format
5
Select the 4:3 format if you want to display
6
FEATURES
CHILD LOCK
the 4:3 picture using the full surface of the
LOCK CHANNEL
•
3 F F F F F
Ñ
É
screen.
•
CHANGE CODE
4
•
CLEAR ALL
5
EXPAND 4:3 format
6
➠
7
Select the EXPAND 4:3 format if you want
to expand movie images recorded in the
letterbox format. When this format is
selected, the black horizontal bars at the
top and bottom are expanded thus filling
up the entire TV screen.
COMPRESS 16:9 format
➠
Select the COMPRESS 16:9 format if you
want to compress full screen movie images
into letterbox format. When this format is
selected, black horizontal bars can be seen
at the top and bottom of the TV screen.
U
P
L
F
SING THE
ROGRAM
IST
EATURE
Program listing feature allows you to navigate through a list of installed programmes for a quick
FEATURES
overview of the channels and activate the channel you have selected.
▲
CHILD LOCK
•
LOCK CHANNEL
•
CHANGE CODE
1. Press the
(Program List) button to
CLEAR ALL
•
PROGRAM LIST
Ñ
É
display the list of installed programmes. The
▲
•
É
1
– – – – –
current channel is highlighted.
2
– – – – –
FEATURES
▲
3
– – – – –
CHILD LOCK
4
•
2. Press the
or
button to cycle
– – – – –
LOCK CHANNEL
5
•
CHANGE CODE
– – – – –
through the programme list and highlight the
▼
CLEAR ALL
•
CLEARED
Ñ
É
channel number you want to activate.
PROGRAM LIST
▲
1 ACTIO
3. Press the
button to activate the channel
2 DRAMA
3 VOILE
you have selected.
4 ROMAN F F F F F
•
É
5
– – – – –
▼
4. Press the
i
button to exit menu from screen.
29
M
A
FM R
F
M
ENU
CCESSING THE
ADIO
EATURES
ENU
A
T
CTIVATING THE
IMER
The Timer feature allows you to set the timer to switch to another FM channel at a specified
time while you are listening to another FM channel. For the timer to function, the set must not be
SOUND
switched off. Once the set is switched off, the timer is disabled. Note : Ensure you are in FM
▲
•
EQUALIZER
120HZ
É
RADIO mode before you access FM RADIO main menu.
▼
•
BALANCE
500HZ
•
AVL
1500HZ
•
INCR.SURROUND
5KHZ
•
k
k
k
10KHZ
MENU
MENU
MENU
FEATURES
▲
•
É
TIMER
▼
▲
•
MODE SELECT
•
SCREENSAVER
1. Enter FM RADIO main menu.
2. Select FEATURES.
3. Enter FEATURES menu.
Use the Menu and Cursor Up, Down, Right and Left buttons to access the Timer
menu to select the items. Make the following adjustments to activate the timer.
1
2
3
4
5
6
TIME
: Use the
buttons to key in the current time
7
8
9
FEATURES
0
TIMER
to enable functioning of the timer feature.
After
Ñ
TIME
keying in the time, exit TIME mode by the Menu
•
START TIME
•
button.
STOP TIME
FEATURES
•
CHANNEL.
TIMER
1
2
3
•
ACTIVATE
4
5
6
START
: Use the
buttons to key in the time you want
7
8
9
TIME
0
Ñ
•
TIME
the channel to be switched on.
START TIME
After keying in the
•
STOP TIME
time, exit START TIME mode by the Menu button.
•
CHANNEL
FEATURES
•
ACTIVATE
TIMER
1
2
3
4
5
6
STOP
: Use the
7
8
9
buttons to key in the time you want
•
TIME
0
•
START TIME
TIME
the program to be switched off.
After keying in the
Ñ
STOP TIME
•
time, exit STOP TIME mode by the Menu button.
CHANNEL
FEATURES
•
ACTIVATE
TIMER
C
ONTROL
•
1
2
3
/
TIME
•
CHANNEL : Use the
4
5
6
buttons to key in the
START
TIMEE
7
8
9
•
0
STOP TIME
FM channel number.
CHANNEL
Ñ
•
ACTIVATE
FEATURES
TIMER
•
TIME
ACTIVATE : Use the Cursor buttons to select between
•
START
TIMEE
•
STOP TIME
the Once and Daily mode to activate the timer.
•
CHANNEL
Ñ
ACTIVATE
FEATURES
DISPLAY
: Use the Cursor buttons to select the ON
TIMER
option to display current time on screen.
•
START
TIMEE
•
STOP
TIMEE
•
CHANNEL
•
ACTIVATE
Ñ
DISPLAY
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
▲
•
É
12:30
▼
▲
•
É
13:30
▼
▲
•
É
15:30
▼
▲
•
É
FM8
▼
▼
▲
•
ONCE
É
▲
•
É
ON