Epson ActionNote 866C Посібник користувача - Сторінка 40

Переглянути онлайн або завантажити pdf Посібник користувача для Програмне забезпечення Epson ActionNote 866C. Epson ActionNote 866C 47 сторінок. Product support bulletin(s)
Також для Epson ActionNote 866C: Інформаційний посібник про продукт (11 сторінок), Бюлетень підтримки продукту (3 сторінок), Інструкції з програмування (1 сторінок)

When you type CSALLOC (without any switches) at the

MS-DOS command line, the program scans your system's

resources and updates the CSALLOC.INI file. You can also use

the switches described in the following table to perform

different functions:

CSALLOC command switches

Command

switch

csalloc /r

csalloc /d

csalloc /s

Using the CARDINFO Command

The CARDINFO command provides these functions:

Identifies the types of PC cards inserted in the PCMCIA

slots

Identifies I/O ports, IRQs, and memory areas used by PC

cards so that you can ensure that two components do not

use the same resources

Turns power to the PCMCIA slots on or off

Displays manufacturer and product information about PC

cards

3-10

Using CardSoft

Function

Displays the current status of memory, I/O port

address, and IRQ resources on your system. The

information includes the following codes to identify

how each address is allocated:

(R) indicates addresses reserved for your PC cards or

other system components

(A) indicates addresses allocated for CardSoft

(S) indicates resources that can be shared by several

system components without conflict.

Displays the contents of the CSALLOC.INI file.

If the system contains a Plug-and-Play (PnP) BIOS,

scans system resources instead of using information

supplied by PnP BIOS.