Epson C11C558001 - LQ 590 B/W Dot-matrix Printer Посібник користувача - Сторінка 31
Переглянути онлайн або завантажити pdf Посібник користувача для Програмне забезпечення Epson C11C558001 - LQ 590 B/W Dot-matrix Printer. Epson C11C558001 - LQ 590 B/W Dot-matrix Printer 48 сторінок. Epson lq-2090: product brochure
Також для Epson C11C558001 - LQ 590 B/W Dot-matrix Printer: Посібник (11 сторінок), Технічна довідка (7 сторінок), Технічні характеристики (2 сторінок)
Друкувати сторінку
To load a single card, follow the
instructions in "Loading Single
Sheets with the Paper Guide" on
page 26. To load multiple cards,
see the Reference Guide.
Note:
When you are loading
postcards long edge first,
always load them in the top
slot.
When loading A6 size cards,
always load them long edge
first.
Before printing, turn on the card mode by pressing the Tear Off/Bin
button several times until the left Tear Off/Bin light is on.
Using the Micro Adjust Function
The Micro Adjust function allows you to move the paper forward or
backward in 1/180-inch (0.141 mm) increments to adjust the tear-off and
top-of-form positions.
Adjusting the tear-off position
If your paper's perforation is not aligned with the tear-off edge, you can
use the Micro Adjust function to move the perforation to the tear-off
position, as described below. Your tear-off position setting remains in
effect until you change it, even if you turn off the printer.
Caution:
c
Never use the knob to adjust the tear-off position; this may damage the
printer or cause it to lose the tear-off position.
Paper Handling
31