Troubleshooting
Error Messages
The selected projector is busy. Do you want to continue the
connection process?
EasyMP Network Projection initialization failed.
Connection failed due to keyword mismatch.
Network adapter information could not be obtained.
One or more connected projectors do not support resolutions
greater than SXGA. Reduce the screen resolution and reconnect.
One or more projectors are not responding.
Enter the keyword displayed on the projector screen.
Cannot start this application while USB Display is running.
Cannot connect to the projector using this version of EasyMP
Network Connection. Install the latest version of EasyMP Network
Projection.
You tried to connect to a projector that is connected to another computer.
When the Yes button is clicked, it connects to the projector. The connection between the projector and the other
computer is cut off.
When No is clicked, it does not connect to the projector. The connection between the projector and the other
computer is maintained.
Restart EasyMP Network Projection. If the message still appears, uninstall and then reinstall EasyMP Network
Projection.
p.6
s
When connecting to a projector for which a Projector Keyword has been set, the wrong Projector Keyword is entered.
Check the Projector Keyword that is displayed on the projector's connection standby screen. After the connection is
disconnected and then reconnected, enter the Projector Keyword on the keyword entry screen that is displayed.
p.12
s
Check the following point.
Is a network adapter installed on the computer?
Is the driver for the network adapter used installed on the computer?
After checking, restart the computer and connect again.
If you still cannot connect, check the following.
Check the network settings on the computer and the network settings on the projector.
For details on the network settings to be made on the projector, see s
There is an ELP-735 projector in the connection destination. Change the computer screen resolution to SXGA
(1280x1024) or less.
You cannot connect to multiple projectors simultaneously. Check the network settings on the computer and the
network settings on the projector.
For details on the network settings to be made on the projector, see s
Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword.
Close USB Display and then start EasyMP Network Projection.
Install the current version of EasyMP Network Projection from the EPSON Projector Software CD-ROM supplied
with the projector.
Remedy
User's Guide "Network Menu"
User's Guide "Network Menu"
44
Друкувати сторінку