Epson EasyMP Network Updater Посібник з експлуатації - Сторінка 34
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Програмне забезпечення Epson EasyMP Network Updater. Epson EasyMP Network Updater 47 сторінок. Operation guide - easymp network updater
Друкувати сторінку
Related tasks
Canceling an Update Schedule
Updating the Firmware
Error Status
When an error occurs while updating the firmware, the schedule status displays the error status.
Check the type of error and then follow the instructions here to clear the error. If you cannot solve the
problem, contact your network administrator.
Types of Error
Error (The projector is not responding.)
Error (The network connection has been lost.)
Error (An error occurred when reading the
data.)
Error (An error occurred when writing the
data.)
Error (Projector Internal Error)
Error (Monitor Password Authentication Error)
Error (Other)
Parent topic:
Solving Problems
Remedy
Make sure the projector is on or the projector's
Standy Mode is set to Communication On.
Check the network settings on the computer and
the network settings on the projector. Make sure
the projector network setting has not been
changed due to the DHCP server settings.
Select the correct projector firmware file or
download the firmware again.
Make sure you select the correct projector
firmware and the projector settings are correct,
and then try updating the firmware again.
Restart the projector and try updating the firmware
again.
Check the Monitor Password setting is correct.
If restarting the projector or EasyMP Network
Updater does not solve the problem, contact
Epson as described in your projector User's Guide.
34