Epson EMP Monitor V4.10 Посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Програмне забезпечення Epson EMP Monitor V4.10. Epson EMP Monitor V4.10 34 сторінки. Epson emp monitor operation guide

Друкувати сторінку

Tasks that can be done using EMP Monitor

EMP Monitor lets you carry out operations such as checking the statuses of

multiple EPSON projectors that are connected to a network at a computer

monitor, and controlling the projectors from the computer.

Following are brief descriptions of the monitoring and control functions that

can be carried out using EMP Monitor.

•

Registering projectors for monitoring and control

- Projectors on the network can be searched for automatically, and you can

then select projectors to be registered from the projectors that are detected.

- You can enter the IP addresses for target projectors to register them.

•

Registered projectors can also be assigned to groups so that they

can be monitored and controlled in groups

•

Monitoring the statuses of registered projectors

- The power status (ON/OFF) for projectors and problem and warning

statuses can be checked visually by means of icons.

- You can select groups of projectors or a single projector that you are

interested in, and then check the cumulative lamp operating time or check

the details of information on input sources, problems and warnings for

these projectors.

•

Controlling registered projectors

- Projectors can be selected in groups or as single projectors, and you can

then carry out operations for the selected projectors such as turning the

power on and off and switching their input sources.

- Web control functions can be used to change the settings in the projector's

configuration menu.

- If there are certain control actions which are carried out regularly at

particular times or on particular days, you can use "Timer Settings" to

•

E-mail notification function settings

You can set e-mail addresses for problem notifications to be sent to if a

problem occurs with a projector that has been registered.

Group A

Projector A

Group B

Projector B

System configuration example

TIP

To enable projectors to be monitored and controlled even when they

are in standby mode*, make the following settings at the projectors.

The settings that need to be made will vary depending on the projector

you are using.

s "Configuration menus" in the projector's User's Guide.

•

Set "Network Monitoring" to "ON".

•

Set "Standby Mode" to "Network ON".

* When the projector's

(Power) indicator is lit orange

I want to turn on the

power for Group A

projectors.

EMP Monitor